Page 3 of 7 FirstFirst 12345 ... LastLast
Results 31 to 45 of 103

Thread: Chrony PC Interface Cable project.

  1. #31
    Join Date
    Nov 2008
    Location
    Stevenage
    Posts
    643
    Quote Originally Posted by sniper22 View Post
    im banned from the sales section so im in the dark re the details of this. can someone pm me the article?
    Its not there yet mate, but one is ear marked for you already.

    Cheers
    Stot
    Guns: SLR98 - Phoenix - Ultra - HW45 - P800
    Chronographing: www.chronoconnect.com

  2. #32
    Join Date
    Mar 2006
    Location
    Worcester
    Posts
    22,222
    Quote Originally Posted by Stot View Post
    Thanks ill get it up later.


    You might care to rephrase that.

  3. #33
    Join Date
    Jun 2008
    Location
    Rushden / North Bedfordshire
    Posts
    7,179
    Quote Originally Posted by Stot View Post
    Thanks ill get it up later.

    Cheers
    Stot
    Fnar Fnar

    Don't forget to put one aside for me please Andrew (It's a damn sight neater than my cobbled together board )

    Quote Originally Posted by Parabuteo View Post
    Sounds good.

    Is it ok over a long cable...say 35yds

    Count me in
    Yes and no. The chronys TTL signal has a distance limitation of about 10 feet, while RS232 can go up to 50 feet (~15m) although most specs will say ~25 feet, USB is about 15 feet. So 50 feet is a theoretical maximum (chrony > RS232 adapter > extension > PC)
    You can get RS232 signal boosters to extend the range but you would need 2 possibly 3 of these.

  4. #34
    Join Date
    Aug 2008
    Location
    Gloucester or Cemaes or somewhere in between
    Posts
    2,818
    Not very cheap but it possible to extend the usb range by using a USB > Cat5 cable > USB extension system
    Weapon of choice: A 600mm Canon. Author of the Pellet Photobase. Twitter me or Burp the Frog
    "It's not what you feel that matters, it's who you touch"

  5. #35
    Join Date
    Oct 2008
    Location
    Near Brussels, Belgium
    Posts
    53

    Yes please

    Hi,

    I'd like one including USB adapter too if you take paypal.
    I'd be happy to pay a little more for p&p, since I'm on the continent

    Cheers,

    Johan Daes
    Last edited by remorfer; 15-07-2009 at 06:19 PM.

  6. #36
    Join Date
    Aug 2008
    Location
    Gloucester or Cemaes or somewhere in between
    Posts
    2,818
    put me down for a cable and usb adaptor please Just need paypal addy for payment
    Weapon of choice: A 600mm Canon. Author of the Pellet Photobase. Twitter me or Burp the Frog
    "It's not what you feel that matters, it's who you touch"

  7. #37
    Parabuteo is offline My Chrony has bought it a couple of times...
    Join Date
    Mar 2006
    Location
    Southampton
    Posts
    6,061
    Quote Originally Posted by uk litehammer View Post
    There should be a stereo jack socket on it.
    Where??
    I'm a maggot in another life you know

  8. #38
    Parabuteo is offline My Chrony has bought it a couple of times...
    Join Date
    Mar 2006
    Location
    Southampton
    Posts
    6,061
    Quote Originally Posted by SpikeG View Post
    Fnar Fnar

    Don't forget to put one aside for me please Andrew (It's a damn sight neater than my cobbled together board )



    Yes and no. The chronys TTL signal has a distance limitation of about 10 feet, while RS232 can go up to 50 feet (~15m) although most specs will say ~25 feet, USB is about 15 feet. So 50 feet is a theoretical maximum (chrony > RS232 adapter > extension > PC)
    You can get RS232 signal boosters to extend the range but you would need 2 possibly 3 of these.
    You would probably get away with further with 232 TBH, we used to run it silly distances (I was an AMX programmer till I saw the light, got paid a damn sight more and have more fun...chav trapping)
    I'm a maggot in another life you know

  9. #39
    Parabuteo is offline My Chrony has bought it a couple of times...
    Join Date
    Mar 2006
    Location
    Southampton
    Posts
    6,061
    Nope...deffo an F-1 Chrony but no jack socket

    If it had one, where should it be??
    I'm a maggot in another life you know

  10. #40
    Parabuteo is offline My Chrony has bought it a couple of times...
    Join Date
    Mar 2006
    Location
    Southampton
    Posts
    6,061
    more to the point, where the bloody hell has the sales section gone
    I'm a maggot in another life you know

  11. #41
    Join Date
    Jun 2008
    Location
    Rushden / North Bedfordshire
    Posts
    7,179
    Quote Originally Posted by Parabuteo View Post
    Nope...deffo an F-1 Chrony but no jack socket

    If it had one, where should it be??
    Looking at the chrony from the front, on the left hand side of the display unit (actually on the side of the chrony if you like) you should see a hole. If your chrony is pre 2001 (iirc) then it won't be fitted.

    You can see the hole in this pic (just)

    http://www.airgunbuyer.com/ecommerce.../chrony-f1.jpg

  12. #42
    Parabuteo is offline My Chrony has bought it a couple of times...
    Join Date
    Mar 2006
    Location
    Southampton
    Posts
    6,061

    Oh my god I feel supid!!

    I have just found the ruddy socket.....

    Belive it or not, I are actually a technician

    How embarrassing
    I'm a maggot in another life you know

  13. #43
    Join Date
    Jun 2008
    Location
    Rushden / North Bedfordshire
    Posts
    7,179
    Quote Originally Posted by Parabuteo View Post
    more to the point, where the bloody hell has the sales section gone
    Try altering your location to your nearest town and PM'ing a mod (they must be on a purge )

  14. #44
    Join Date
    Jun 2008
    Location
    Rushden / North Bedfordshire
    Posts
    7,179
    Quote Originally Posted by Parabuteo View Post
    I have just found the ruddy socket.....

    Belive it or not, I are actually a technician

    How embarrassing


    I used to do stuff like that to (ex bench engineer)

  15. #45
    Parabuteo is offline My Chrony has bought it a couple of times...
    Join Date
    Mar 2006
    Location
    Southampton
    Posts
    6,061
    Quote Originally Posted by SpikeG View Post
    Looking at the chrony from the front, on the left hand side of the display unit (actually on the side of the chrony if you like) you should see a hole. If your chrony is pre 2001 (iirc) then it won't be fitted.

    You can see the hole in this pic (just)

    http://www.airgunbuyer.com/ecommerce.../chrony-f1.jpg
    Errrrr,,,,Spike

    Guess what I just found

    What a dick

    I saw the test rig piccy....I'll fetch my coat
    I'm a maggot in another life you know

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •