Anyone wanting info, feel free to email me.....
Don
Here are some piccies of my Logun that I have Xtended by an extra 5". It's now even quieter than my Ripley silencer when used on my 30fpe Rapid!
http://pic4.picturetrail.com/VOL729/...6/72967862.jpg
http://pic4.picturetrail.com/VOL729/...6/72967847.jpg
Don
Anyone wanting info, feel free to email me.....
Don
Here's how I did it.....
Simple enough to do. The hardest part is to get hold of an old Logun silencer first! I had a knackered one knocking about, so decided to use it.
I cut off the 1/2" UNF thread, then carefully ground down the end-cap so it would slot into the newly cut off end, leaving the thread showing. I then ground down a thick washer for the internal tube to seat on, ensuring that it would keep the tube central. Then I used Araldite Rapid to stick the washer on, and to glue the cap into the tube. Then I used a small length of plastic pipe to make the tube, then simply used the original springs and washers for the baffles, cutting down the dampening cloth to suit.
Then you can remove the endcap from your Logun, screw on the extension, and use the endcap to replace the one you altered, and hey presto, extended silencer. Works very well too!
Don