email sent.
Mark
hi,does anyone know where i can get an exploded diaghram and a set of seals for a FAS 606 please, many thanks..greasemonkey
more guns than you can shake a stick at!
email sent.
Mark
If Checkmate Guns are unable to help, then perhaps the manufacturer will be able to?
http://www.dominoguns.it/fas/
HTH
Mark
hi mark,thanks for your help and email, unfortunately the 606 is significantly different from the 604.i have tried the manufacters website with no joy.the gun i have was purchased in non working order as a project.it has been stripped before and i am not sure the valve has been assembled correctly.hence the need for a drawring ..if anyone has a 606 manual i would be most grateful for a copy.....cheers..greasemonkey
more guns than you can shake a stick at!
can anyone help with an exploded diagram of a FAS 606 please,also nobody in the uk seems to be able to supply a seal kit for this gun,any suggestions?..cheers..greasemonkey
Last edited by greasemonkey; 29-04-2010 at 03:48 PM.
more guns than you can shake a stick at!
still looking!
more guns than you can shake a stick at!
Have you seen this;
http://www.potfire.com.au/compend/spfas606.htm
them seem to a diagram of the trigger assembly, perhaps it's worth an email to ask if they have an exploded diagram ?
thanks for that MPW,i had seen it though ,its the only 606 drawring on the web!.finally got fed up with looking for seals so machined up the piston and valve parts to suit seals from my numerous o ring selection.spent this afternoon figuring out what sequence the valve parts are assembled and BINGO! the beast works like a dream,far more accurate than i am but then that could be said for nearly all my guns,thanks everybody...cheers..greasemonkey
more guns than you can shake a stick at!