Yes, the part number is BS008.
Hi i have a mk2 meteor and have been looking on chambers site but i can't enlarge there picture so what i need to know is this the right part to order BS008
Breech seal , its the seal in the end of the barrel where the pellet goes
Cheers
Yes, the part number is BS008.
Life is to be enjoyed, not endured.
phone bsa they sent me two for free mate, quality service, i phoned to order a bsa breech seal for my mk5s and the guy very politely said ill pop some in the post for you next day two came free of charge
To be fair.... I am probably the worst shot in the uk.....even with a shotgun
The BSA part number for the washer is 16-1050 according to diagrams in Dennis Hiller's book.
Life is to be enjoyed, not endured.
Hi grumpar
You'd be better off ordering part number BS040 from chambers.
The part number is for a Weihrauch HW35/80 breech seal and it gives a better seal and last longer than the BSA one.
All the best Mick
If you need lots of BSA/Weihrauch breech seals then you could do what I do.
Find a nice new Scania Lorry and take the breather pipes off the fuel tank, these pipes are 8mm ID X 12mm OD and are made of hard rubber.
Mount some of the pipe in the lathe and cut to length with a stanley Knife blade mounted in the toolpost --- instant breech seals.
All the best Mick