-
-
Hi Jeff
Next to impossible to get bits for these old BP breechloaders but I have had results in the past from flea bay .com (not flea bay .co.uk)
Also had several parts for the oldies in my collection off Gunbroker.com
Cheers
Lee
-
have you tried henry kranks or peter dyson in huddersfield
-
Hi. Lee & Loiner1965
It looks very much like the cobwebs are going to have to come off the milling machine and lath to get these parts made, it's a bit too cold in the workshop at present.
I have a 12mm finished square bit of tool steel somewhere in the workshop that should be ok for the job.
I had a look at what Peter Dyson had and he might just have a spring that will act as a firing pin spring.
Many thanks to both of you
-
I have a Wanzl in similar condition, it is missing the bolt and the operating mechanism. I think it was an attempt to deactivate the gun before the ammunition became obsolete. If you are comtemplating making some parts I would appreciate it if you could double up. I also need a hammer, I do not think this may be such a problem as it is still of 'Lorenz' pattern can anyone our there help?
Regards
Ormicron
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules