If you can't get them in the UK, you might want to try North American Arms directly.
Jim
Anyone know where you can obtain a .22 bullet mould that replicates the 30 grain bullet that North American Arms supply for their Companion BP pistols?
Thanks Dougie
Last edited by Dougie; 17-11-2010 at 09:20 AM.
If you can't get them in the UK, you might want to try North American Arms directly.
Jim
UBC's Police Pistol Manager
"Nasty, noisy things, revolvers, Count. Better stick to air-guns." Sherlock Holmes, The Adventure of the Mazarin Stone
These guns are shipped from the factory with the bullets that are ordinarily loaded in .22 short cartridges. Acquiring a mold ay prove difficult and would have to be a custom mold I reckon.
However, there are probably a couple of options. See if you can get an ammo company to sell you just the bullets or have you thought about "round ball"? #4 buckshot is .24 calibre and may go quite nicely....
Failing either of he above, the bullets are availibe from NAA direct.
Lyman do a 22 mold - its about £70 though
You might find a .22 LEM Spitzer mould if you ask in the Collectable Airguns section. This was a mould for casting solid bullet shaped airgun pellets circa 1970's-1980's. I've read of people using them for loading .22 Hornet cartridges so they might be ok for a BP revolver.
Alternatively, send an email to NAA and ask if they have an agent in UK (or Europe) where you can buy the bullets from. Sales contact from their website is kenny@naaminis.com
I collect vintage Japanese air rifles & vintage Japanese pellets
Information sought about antique firearms with Japanese markings, do you have one ?
I ought to get one of these. It must fire such a small powder charge that I'll bet it doesn't even smoke up an indoor range very much!
Jim
UBC's Police Pistol Manager
"Nasty, noisy things, revolvers, Count. Better stick to air-guns." Sherlock Holmes, The Adventure of the Mazarin Stone
Yep Jim only use a .3cc Lee scoop of powder, the firing pin does need a squirt of oil every 15 rounds, as the pistol soon gets carboned up with the parts being so small; great fun tho.
May have solved the bullet head problem, there's a group buy on 'Cast Boolits' for a .225 34grn mould that looks like it will do the job. Did order some bullet heads from NAA took 10 days to get over the pond which is great service (£42 of my Great British Pounds for 1000 delivered), however I'd rather have the ability to make my own just in case Mr Obama decides to stop exports of anything to do with firearms!!!
Thanks, Dougie. What size percussion caps do these little critters use?
Jim
UBC's Police Pistol Manager
"Nasty, noisy things, revolvers, Count. Better stick to air-guns." Sherlock Holmes, The Adventure of the Mazarin Stone
Thanks!
Jim
UBC's Police Pistol Manager
"Nasty, noisy things, revolvers, Count. Better stick to air-guns." Sherlock Holmes, The Adventure of the Mazarin Stone
I collect vintage Japanese air rifles & vintage Japanese pellets
Information sought about antique firearms with Japanese markings, do you have one ?