I have never removed the scope ramp on a b55 ,but from your description it sounds very similar to the BSA Maxi grip ramp.
Can you put up a link to some photos of it, topside and underside.?
Pete.
My recently acquired BSF 55 needs a scope ramp.
Have recently acquired a BSF 55, in .22, which shoots smoothly at 11.6 ft/lbs.
It shoots as accurate as I can hold with its iron sights but when I mounted a scope I found that the scope rail worked loose after several shots.
Removing the scope ramp, by undoing the screw in the front of the ramp, I found that the rear lug on the scope ramp is missing.
As the scope rail appears to be made of an alloy [?] I'm guessing that someone has made a botch job of dismantling the rifle in the past !
Anyone know where I can get hold of a scope rail, new or second hand ?
Thanks, hopefully ......
Baz
Regards,
M151A1
I have never removed the scope ramp on a b55 ,but from your description it sounds very similar to the BSA Maxi grip ramp.
Can you put up a link to some photos of it, topside and underside.?
Pete.
The under side of a BSF scope rail has a key way that intrudes into the cylinder. I suspect the same as you in that someone has tried to remove the main spring without removing the scope rail first!
ATB
Ian
Founder & ex secretary of Rivington Riflemen.
www.rivington-riflemen.uk
Thanks, hopefully ...... Just looked on chambers site, no listing for the ramps, parts not even numbered, if the lug is all that prevents dismantling as a last resort you could araldite the ramp in place after degreasing the ramp & cylinder properly,if needed a little heat would enable it to be removed again. At least you'd be able to use it scoped up then.
Last edited by junglie; 01-03-2013 at 09:48 AM.
Thanks for the replies,
I think some one has been rather brutal in removing the scope rail , previously !
Araldite had crossed my mind [as a final resort] but I'd rather try and get hold of a good scope rail [ or was that Holy Grail].
In the meantime I can still enjoy the 55 with the iron sights.
Once again;
Thanks in anticipation
Baz
Regards,
M151A1
have a standard one in .177, great little rifle
As you said, superb little rifle.
Does anyone know where I can get spares ?
..... Please .
Baz
Regards,
M151A1
Chambers dose some, but not allways in stock. Beleve they bought a load of spares up from some old gunshop in Scandanavia.