were does one aquire a drozd 7"barrel and silencer
I've had a productive day! Ordered a flush mag plug from Rus military, rubber Pearce grips from midway uk and co2, gamo lead balls and pelloil from ramsbottoms.
Come on postie, what's keeping you!?
My ignore list: <Hidden information>
were does one aquire a drozd 7"barrel and silencer
have a look here:-
http://www.airgunbbs.com/showthread....ighlight=drozd
video transferred to DVD, USB etc. Old negs and photos scanned to digital media
www.digitalconversions.co.uk
any one tried one of these valves?
http://itrademarket.com/milzone/3300...ercy-valve.htm
http://itrademarket.com/milzone/3300...oles-valve.htm
well it don't say..what weight.... well there is this valve as well is that a stock 3 hole valve?... I wonder as mine has the 3 hole valve as standard I believe some just had 1 hole? what sort of power level are people getting stock 3 hole valve?
Last edited by glmaybe; 05-05-2012 at 09:41 AM.
HI iv got a std 3 hole valve [opened up slightly] the factory says 380 fps [ std] ,but mine only shoots at a avrage of 300 fps with steel 5.4 gr bb whitch is a lot down on 380 fps. would like to know wot a up graded valve would do and how mutch to buy some one said thay are avalible on e-gun but im unable to find them .its very hard to drill / mod the valve due to it being s-steel and very small
atb john
Grips and mag bolt arrived this morning. Grips look and feel great but mag bolt was too short! It's 7mm long overall and falls into the mag before capsule has sealed. Anyone else had this problem? All credit to Rus military tho, I phoned him and he's making a 10mm one for me.
My ignore list: <Hidden information>
Received my Mak a week ago, and loving it... Everything's a little stiff at the moment, but getting smoother already. This is a bit of a Lazarus thread, so any mods that members are doing, or part suppliers about, that haven't been mentioned already? Most of the bits on rusmilitary seem sold out at the mo....
Tim
I take it that's the gen 5 from "Ze Germans"? I've reduced the valve spring a tad, removed the barrel circling and wound the barrel in so it meets the mag, greased a few bits and have a concealed bolt on its way.
I've also arranged to have the barrel screwcut internally and a slim mod made up! Can't wait! (Again)
My ignore list: <Hidden information>
Tim, come and join us at the Mak forum, all you could ever want to know about Maks there.
http://makarovpistol.myfineforum.org/index.php
Max; looking for: Baikal IZH 61 side lever rifle
Judging by how quickly these sell on the forums there is obviously something about them.
I just hope to get one soon.