Ahem. Available via our sponsor: http://www.jsramsbottom.com/products...s410-10mm.html
A bit more fulsome: http://www.airrifle.co.za/threads/40...gger-Mod-Guide
If you don't want to risk buying from Poland Protec supplies gave them for £100
FWB P8X,Hammerli AP40, Steyr LP1 Walther LPM-1, CPM-1, CP1, CP2, LP3, LP53, LP300, LP400, Terrus, Pardini P10, FX Wildcat .177, HW100 .22, AA S410 .22, BSA R10 MK2 .177, , HW77, 80, 90 BB AK47, S&W 586 and more blow back Co2 BBs than you can shake a stick at
Chaps, I've made a little review of a couple of silencing options for the CP1 here: http://www.airgunbbs.com/showthread....w&goto=newpost
Ex-Airgunner
Just received my pistol today.There's a lot more hammer "thump" than any Co2 pistol I've had before.Quite noticeable if rested,it wouldn't pass the pellet on the breech test The bolt on mine pops up with each shot,but not if no Co2 installed.Anyone else's do this? I might have to investigate further.
Mine doesn't do that and the hammer doesnt seem to make that much noise.
Is yours a .22 or .177?. It might be worth cronoing it to see if it is overpowered. Maybe the hammer spring is too powerful
FWB P8X,Hammerli AP40, Steyr LP1 Walther LPM-1, CPM-1, CP1, CP2, LP3, LP53, LP300, LP400, Terrus, Pardini P10, FX Wildcat .177, HW100 .22, AA S410 .22, BSA R10 MK2 .177, , HW77, 80, 90 BB AK47, S&W 586 and more blow back Co2 BBs than you can shake a stick at
I don't get any bolt jump on mine. Tinbums Spring guide works wonders on these though and you could also check out Richie rich posts about cleaning them up
I chronoed someone's yesterday after weighing the pellets......
Guys do check the power of these.
Like you, I really fancy the multi shot, it looks like it can be used single shot as well. Where did you read it will be available in June? Is that from SPA in China or a Polish outlet? I emailed Silesia Factory in Poland yesterday to ask if and when they would be stocking it - haven't had a reply yet.
June was mentioned on the Solware website and they were quoting £190 for them.
Just seen this from another forum, Protek are now doing the CP-1 for 99 quid
http://www.proteksupplies.co.uk/