Originally Posted by
Barryg
I also agree that the titan and vmach are the top springs
but the titan( no 2 ) in a 80 that is running right is risky if you want to stay legal, its the same with the old large diameter 80 vmach springs,
I think that Steve now supply's hw 95 diameter springs for the 12ft/lb 80.
Does your 80 have a large diameter no 2 titan in it ? is it .177 or .22 and how close does it get to the limit.
No Barry, not right risky. 11.4 in 20 cal, it's not the spring that's the issue as much a seal wear, that was the problem with the old Venom seals, the ones that V Mach now use for fac rifles only - (power pulse). Titan springs don't shoot up if correctly set, as welsh willy's kits clearly show.
What people perhaps don't realise is to check after a year or so, not just at original set up time. I find that in 177 and 22 hw80s are fine, I'm not keen on sub 12ftlbs in 22, prefer 85/95 then unless 80 short stroked or reduced diameter
Looking for TO-6 Trigger unit unmessed with or T0-6 kit for 34