Guessing nobody knows anything about the said gun, oh well,![]()
Webley Omega,i need to service this gun.(less than 10ft,) i have the spring out, so now to the piston.I guess i have to take the trigger apart,unless someone knows a (trick) ,thanks in advance for your imput/advice.(note,PCP`s so much easier)![]()
1 Rapid+sentinal n/v, 1 HW100+ Mamba lite
Guessing nobody knows anything about the said gun, oh well,![]()
1 Rapid+sentinal n/v, 1 HW100+ Mamba lite
Hi mate.. i made a walkthrough for this trigger when refurbing a theoben sirocco. Hope this helps
Donald
Parts diagram and spares list at Chambers...
https://www.gunspares.co.uk/products/24538/Omega/
pm me your email addy,i'll send you a stripdown guide
Use your smartphone or camera, take pics before you start. However I managed to strip and rebuild with no tips or literature about 25 yrs ago so it can't be that difficult![]()
Just taken my Omega apart to fit new spring and service. Trigger needs to come apart and cocking link removed to get the piston out. I removed the barrel pivot screw so I could detach the cocking link .
I found the trigger assembly to be a piece of cake to assemble [though I have built a kit car or two] and generally much easier than that on an Original mod 50 which is not difficult just a fiddle to hold together .
Need to remove the spring from an omega. Do I need to remove the trigger unit / dismantle to do so? Mach 1.5
Sorted...cheers lads. Mach 1.5