Originally Posted by
Benelli B76
Dave, the PU rod I buy works as good as factory supplied and is available in similar hardness as measured with a Durometer at 90 to 95 Shore A scale. I have made seals for the Original 6 M pistols with the dovetail taper fitting just by setting up cutting tools as required on my little Emco Compact 5 lathe. Making PU replacement seals for leather ones in old classic air rifles like the Bonehill Brittania and others sometimes gives up to a 100 fps increase in power. Obviously you have to get a good fit, neither too tight or too lose. Having a thin undercut lip on the edge of the seal helps it seal in the chamber bore under compression.
Baz