It's either too much spring or if you've fitted a new spring guide and top hat, their combined length is too long and they are touching before the rifle cocks.
Well all back together but will have to cut a bit more of the titan spring as it will not compress enough to cock, so assume I am spring bound(my 1st strip down off a springer)
It's either too much spring or if you've fitted a new spring guide and top hat, their combined length is too long and they are touching before the rifle cocks.
Part number MS009 from chambers.
That's what I used. No chopping required and settled on 11.2
Regards,
Rhys
Theoben TTR1 .177, Steven B Blue/Grey Laminate Stock, Nutshot Mod, Hawke Sidewinder 10x42 Tac IR
Daystate Pulsar. 177, Donny FL Sumo Mod, Pard NV008LRF
Just had a clean up and a new Titan spring from chambers part no TS012 for the 300 and the 400 and the fenix so I suppose some spring shortening was to be expected
Just about to take another bit of - the 3rd time the gaps on the titan spring between coils is quite wide,compared to the state of the old spring.