Lawrie Amatruda on here will probably be able to to help....
Failing that try JG Airguns in the states - they do complete valve assemblies
I’m hoping someone can help please. I have a Crosman 150 pistol which I have renewed the seals in. It still leaks slowly from the barrel which I believe is the valve stem seal. I can’t find anyone who does a replacement that will post to the U.K. I emailed Mac1 Airguns who said he could ship to the U.K. but after emailing him again (twice) he’s not got back to me
I’m hoping someone on here has maybe had the same problem and can help.
Many thanks
Mark
Lawrie Amatruda on here will probably be able to to help....
Failing that try JG Airguns in the states - they do complete valve assemblies
I’ll give them a try, thank you.
All the best
Mark
Thanks Baz. I’ll give Lawrie a go as you’re the second person to recommend him.
Thanks guys for your help.
Cheers
Mark
hi mark, i rate lawrie very highly.. thankyou.. J.S.D.
Thanks Jimmy, I’m sending the valve to him ASAP
Kind regards
Mark
if you haven't access to a lathe you can make them with hole punches I use urethane crosman cart seals that I trim to fit
the seal replaces same as a xs 78/79 punch stem out of brass part remove old seal fit new one them press stem back in I then spin in lathe and square up
I have also made a new body from ptfe or carbon filled ptfe but it's a bit too hard a seal for cos pressure really
Hi Ped
Thanks for your reply. Lawrie’s been in touch so should be ok. Good to have the info for the future though as i never know what I’m gonna be tinkering with next!
Thanks again
Mark
Just wanted to say a big Thank You to all who helped with my question. I’ve received the valve back from Lawrie and he’s done an outstanding job on it. It’s now shooting better than ever so thanks everyone and Thank You Lawrie 😁
Merry Christmas
Mark
Lawrie Christmas