Where can I get some of these, magic9er has some on his website but I am not sure if he is still trading.
What size are they? Tried some generic ones from the hardware place but they mashed up.
Any favourite seals for this semi-auto? Probably the same as for the Tau 7 and similar ...
I've read that some Jonnys on here cut small sections of automotive fuel pipe to make piercer seals?
Maybe those for the Tau 7 fit.
The cap isnt exactly the same in depth, but it is in width.
ATB,
yana
The same seal fits a lot of C02 pistols and a few rifles.
Baz
Last edited by Benelli B76; 31-01-2018 at 04:40 AM. Reason: extra info.
BE AN INDEPENDENT THINKER, DON'T FOLLOW THE CROWD
Thak you gentlemen, magic9 got back to me and some polyurethanes are on their way ...
Baz fixed me up with some polyurethane seals for a Tau 7 - worked a treat I had no joy with the seals that came with the pistol or the replacements that I bought from the UK distributor (they would bulge/distort/leak CO2)
Treat Others As You Would Wish To Be Treated.
Yes I did try that after a previous recommendation (might of been yourself) but no joy. The sealing arrangement is a curios design, an o-ring fairly loosely within a groove, sliding inside a tapered tube.; it must be highly dependent on the sliding interference fit. The seal must be made before the C02 punchuresd otherwise it could blow out/distort the seal. The OEM seals are quite soft and easily get pushed out of shape, on mine it used to leak straight off, or after one shot.
The polyurethane seals are much more robust and secure and worked perfectly in my Tau 7; maybe there is some variability in the internal tube diameter.
Treat Others As You Would Wish To Be Treated.
Item number 141658790974
Bought 10 pf these size 13.5mm x 2.5 mm last November for £2.18 and am still running on the first one I put in after dozens of Co2 capsules.
_______________________________________________
Done my bit for the BBS: http://www.airgunbbs.com/showthread....-being-a-mod-… now I’m a game-keeper turned poacher.