Next step:
Edit: I should state on here that it is of course one of the amazing Gary Cane creations.
You know I take cards, right?!
http://www.airgunbbs.com/showthread....Scout-Biathlon
My ignore list: <Hidden information>
Next step:
Edit: I should state on here that it is of course one of the amazing Gary Cane creations.
Last edited by Solvo; 03-03-2018 at 06:51 PM.
Yes you do as the stock curves round the tube.
www.shebbearshooters.co.uk. Ask for Rich and try the coffee
my friend has bought one of the auto 5 full length -- its rubbish -- cannot get a group out of it -it shoots all over the place no 2 pellets the same and that's bench rested at 20 m and yes he is a good shot he just won a bench rest comp and rated 6 th in the midlands he is trying diferent pellets at the moment -- he has a problem with the air cylinder coming loose to the rifle is not even a week old yet
its a brand new gun should not need messing with
over 2 grand I would expect perfection out the box
I will stick to my a a 400 thanks
Must be one to go back to the dealer then, if your chum has tried getting the airtube tight first. Loose tube will not help.
I have to say mine was bob on for accuracy from day 1. 22 cal and full length SA. Here's a card shot about two months after I bought it, 20 yards standing, ten shots (two separate magazines) using JSB 5.51 straight from the tin.
Tell your chum to persevere as this is a superb piece of kit really.
https://i.imgur.com/d5TsdUb.jpg
www.shebbearshooters.co.uk. Ask for Rich and try the coffee
the instructions say it was tested at the factory even included the test target so it should not need setting up
but if you found the motor in the back seat and had to fit it yourself that would be different
I really like that stock too...maybe it's the angle but looks too deep at the rear and no depth at the front.
I know GC would make it to suit me though.
Chairman Emley Moor F.T.C. 2023 - Misfits champ, HFT extreme champ, NEFTA hunter champ, Midlands Hunter champ, UKAHFT champ.
https://sites.google.com/site/emleymoorftc/contact-us