Did some pics.
It's a bit tatty, but i think the pix make it look even worse 
The top woodwork is non original, but I needed something to cover the BB "hopper", and this was close. The original goes all the way forwards to the steel wrap-around bracket.
Bottom pic shows the massive counter-bore, which extends half way down the barrel.
3rd pic shows the gun cocked, held on the trigger sear, ready to fire.
Power is very low as there is no mechanical advantage in the bolt system, a (thankfully) weak spring, and a 4" long pellet probe / transfer port
Last edited by Shed tuner; 06-07-2018 at 05:23 PM.
Always looking for any cheap, interesting, knackered "project" guns. But not lathes. I have too many lathes. Thanks, JB.
Reply With Quote