Quote Originally Posted by --ped-- View Post
no need to Loctite them and that makes it a pain to align the port(some valves aren't drilled perfect and you find you have to adjust them so the port is central when the trigger frame screw is in the valve)
the early phase 1 and most 2nd phase ones have the steel and brass stem and I rebuild these quite often especially the similar ones fitted to 2100/2200 and 766 models but the later stem can be used on all models bar the 1322 medallist with the blow by stem
Cough --- I was only talking about Loctiting the exhaust valve cap onto the stem.