Reply With QuoteNot trying to be facetious, really just trying to help, but they're available from Chambers/Gunspares (though doesn't confirm size):
https://letmegooglethat.com/?q=Umarex+CP88+Slide+Screw
Part number B1673 - £3.16 from Gunspares.co.uk
Registered User
Hello all, i was messing around with the front silencer adaptor and lost the original front screw on it. Does anybody know what the screw size is and what thread so a can pick one up off .bay or somewhere? Thanks m
BSA R10se .177 walnut, Bowkett blueprint & reg, Optisan 6-24x50 ffp - BSA T10 Scorpion .22 tac, xtx air tuned, huma reg, Hwk tac 30 8.5-25x42 - Edgun Leshiy II .22 - A&M mods
Registered User
Not trying to be facetious, really just trying to help, but they're available from Chambers/Gunspares (though doesn't confirm size):
https://letmegooglethat.com/?q=Umarex+CP88+Slide+Screw
Part number B1673 - £3.16 from Gunspares.co.uk
Politically Incorrect
I think you will find the thread size is 3mm. and the length is approx. 15mm.
I have a box of similar screws, ex computers, so give me your address by PM, and I will put one in the post. It may not be Hex Head as per the original, but will do the job.
I have one of the silencer adaptors in front of me right now.
Last edited by Troubledshooter; 31-03-2021 at 04:49 PM. Reason: Additional info.
Posting Permissions