Page 1 of 13 12311 ... LastLast
Results 1 to 15 of 195

Thread: My Mercury Ratting Rig

  1. #1
    Join Date
    May 2008
    Location
    Quigley Hollow, Nuneaton
    Posts
    17,125

    My Mercury Ratting Rig

    Feeling somewhat Patriotic this weekend, and not wanting you good folks to think that I only appreciate fine Airguns from the Fatherland, I thought I'd show you my BSA Mercury ratting rig.

    For some strange reason I rarely show this to anyone and it's never been used at the Boinger Bash. :-


    image.jpg



    Unfortunately, when I got it the previous owner had decided to customise the stock into a skeleton stock and had tastefully added some images of flying pheasants --- Sparing no expense on this gun I wrapped the skeleton stock in electrical tape. :-

    image.jpg

    image.jpg

    To take care of the infamous BSA barrel wobble I lovingly fitted a 1/4" BSF bolt through the breech jaws and Meteor MK 5 barrel.

    image.jpg

    image.jpg


    Now when I say this is my ratting rig, I don't mean it's shot hundreds of rats --- it's killed thousands.

    And the reason that I've got it out now is that I've decided it's time that I gave the old girl a service/tune and a little makeover --- I actually bought a new stock for her ten years ago off here.


    She's probably the best £10 I ever spent.






    All the best Mick

  2. #2
    Join Date
    Jun 2012
    Location
    Oslo, Norway
    Posts
    2,876
    Planning for some piston weight tinkering?
    Too many airguns!

  3. #3
    Join Date
    May 2008
    Location
    Quigley Hollow, Nuneaton
    Posts
    17,125
    Quote Originally Posted by evert View Post
    Planning for some piston weight tinkering?
    Funny enough, evert.

    I'm just sat here with a calculator working out how many 12mm holes I'll have to drill in the piston body to remove 50grams in weight from the 300gram piston before adding 20grams of liner and top hat to take it back up to 270grams.

    Looks like 30 is the answer.

    I'm also looking at weight reduction of the ally piston head which is about 20grams from memory.





    All the best Mick

  4. #4
    Join Date
    Jan 2004
    Location
    Lowestoft
    Posts
    845
    Those pheasant pictures are something else - they remind me of a magic lantern investigation into whether a galloping horse ever looses contact with the ground. Perhaps you could place a series of rat pictures in there?
    Best Regards

    Simon

    I've got some slug guns.

  5. #5
    Join Date
    Feb 2010
    Location
    PONTEFRACT
    Posts
    142

    The rat look

    Great guns Mercury’s one of my favourites Judging by the number of vermin it as accounted for it has earned a little TLC great post mick
    Regards
    Vic

  6. #6
    look no hands's Avatar
    look no hands is offline Even better looking than a HW35
    Join Date
    Apr 2003
    Location
    Telford, even closer to Tony L.
    Posts
    12,352
    Isn't the Queen from the Fatherland

    Pete
    Far too many rifles to list now, all mainly British but the odd pesky foreigner has snuck in

  7. #7
    Join Date
    May 2008
    Location
    Quigley Hollow, Nuneaton
    Posts
    17,125
    Quote Originally Posted by look no hands View Post
    Isn't the Queen from the Fatherland

    Pete
    That's a bit like fight club, Pete --- first rule about it is that we don't talk about it.

  8. #8
    Join Date
    Apr 2002
    Location
    Near Wimbledon, SW London, or Lusaka, Zambia
    Posts
    26,987
    Quote Originally Posted by T 20 View Post
    Funny enough, evert.

    I'm just sat here with a calculator working out how many 12mm holes I'll have to drill in the piston body to remove 50grams in weight from the 300gram piston before adding 20grams of liner and top hat to take it back up to 270grams.

    Looks like 30 is the answer.

    I'm also looking at weight reduction of the ally piston head which is about 20grams from memory.

    All the best Mick
    As I hear you don't like milling... two holes at each end, and then a gentle application of the precision angle grinder to join them up gives a cocking slot type weight saving much quicker. two slots, even spaced with the actuall cocking slot, should get you there
    Always looking for any cheap, interesting, knackered "project" guns. Thanks, JB.

  9. #9
    Join Date
    Feb 2009
    Location
    Oxford
    Posts
    1,664
    You could sell that stock described as new in the sales section, electrical tape included As fashions come and go I wonder when we'll see a revival of hand carvings and hunting scenes.
    I shot an Airsporter for the first time at the last boinger bash and it was nice to shoot.

  10. #10
    Join Date
    Apr 2012
    Location
    Retford, Notts
    Posts
    37,287
    You can't beat a good ratter! Nice one, Mick.

    Much preferring your breech bolt to the factory's attempt, too.
    THE BOINGER BASH AT QUIGLEY HOLLOW. MAKING GREAT MEMORIES SINCE 15th JUNE, 2013.
    NEXT EVENT :- May 17/18, 2025.........BOING!!

  11. #11
    Join Date
    May 2008
    Location
    Quigley Hollow, Nuneaton
    Posts
    17,125
    Quote Originally Posted by Shed tuner View Post
    As I hear you don't like milling... two holes at each end, and then a gentle application of the precision angle grinder to join them up gives a cocking slot type weight saving much quicker. two slots, even spaced with the actuall cocking slot, should get you there
    Ah, Jon.

    I'd be happy to carve out a couple of slots with an angle grinder but I reckon the piston would be stronger if I just drilled it to lighten it.

    Besides which, I also like the idea of having my piston looking like a piece of cheese off Wallace and Gromit.




    All the best Mick

  12. #12
    Join Date
    May 2008
    Location
    Quigley Hollow, Nuneaton
    Posts
    17,125
    Quote Originally Posted by ratbuster2240 View Post
    I shot an Airsporter for the first time at the last boinger bash and it was nice to shoot.
    There's the thing, James.

    The Airsporter and Mercury has the same bore and stroke as my Original 35 which is such a nice firing cycle it inspired me to have another look at my BSAs.

    As the Mercury uses the same piston as the MK4-6 Airsporter, I'm hoping to upgrade my two Airsporter S when I've settled on a tune for the Mercury.



    All the best Mick

  13. #13
    Join Date
    Jun 2012
    Location
    Oslo, Norway
    Posts
    2,876
    IF iI remember correctly, my own bastard Mercury has a piston milled for a sight rail. That might help a bit?
    Too many airguns!

  14. #14
    Join Date
    May 2008
    Location
    Quigley Hollow, Nuneaton
    Posts
    17,125
    Quote Originally Posted by evert View Post
    IF iI remember correctly, my own bastard Mercury has a piston milled for a sight rail. That might help a bit?
    Yes, evert.

    The late Airsporter/Mercuries had a cutout in the top of the piston skirt to clear the Maxgrip scope rail lugs.
    I'd prefer to keep the full skirt to retain the option of fitting a bearing if I feel the gun needs one.



    All the best Mick

  15. #15
    Join Date
    Apr 2002
    Location
    Near Wimbledon, SW London, or Lusaka, Zambia
    Posts
    26,987
    best airsporter tune is to chop the spigot, thread m8, stick on adapter for a diana 28mm seal, job done. +5mm stroke and a seal that actually works, transforms them.
    Always looking for any cheap, interesting, knackered "project" guns. Thanks, JB.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •