What have you got, just a tube, or a tube & some bits ?
There are youtube vids on improving the shroud, some must show how they strip down.
I was sent a Mark Dempsey shroud and despite looking on the web and chatting to the guy who sent it I can't find any fitting instructions.
Does anyone on here have a link to show or can tell me how they are fitted?
Thanks.
What have you got, just a tube, or a tube & some bits ?
There are youtube vids on improving the shroud, some must show how they strip down.
This is what I have.
https://ibb.co/Hr022cy
https://ibb.co/w0P6h48
https://ibb.co/d527NCD
This is what I have.
https://ibb.co/Hr022cy
https://ibb.co/w0P6h48
https://ibb.co/d527NCD
Sorry but they tell me nothing,
A shroud will usually either screw on, or push on with a locking grub screw,
a 10 second internet search shows me the standard shroud tube unscrews to leave a muzzle support which screws on to the barrel, and a breech end support held in place by a grub screw.
so presumably you just unscrew & remove the old one & screw on the replacement flat end to the breech concave end to muzzle
thats the way mine was on my p15