Not sure if there is any adjustment as I've never had a need to strip mine. I have sent a copy of the user manual to the email address listed in your profile. There is an exploded diagram on page 7. Hope this helps
Does anyone know if there is any lateral adjustment on the underlever of a 20 year old Pro Sport? It's not a major issue but it's catching the stock slightly on one side at the front of the rifle.
Many thanks.
Not sure if there is any adjustment as I've never had a need to strip mine. I have sent a copy of the user manual to the email address listed in your profile. There is an exploded diagram on page 7. Hope this helps
The stock screws on both sides can adjust this gap slightly.
I have 2 pro sports and you have to balance the 4 stock screws to get an even gap.
My guess is the side that is touching has the stock screws too tight.
Just undo them half or quarter turn and it should open the gap.
Then tighten the other side the same amount until the gap is even on both sides.
Master Debater
yeah, you can just shim between the stock and the mounting bracket for the stock screw. once you have it right, fix the shim to the bracket with loctite, makes it much easier to assemble/disemble..
Always looking for any cheap, interesting, knackered "project" guns. Thanks, JB.
Thank you all for your help.
I started with the simplest suggestion which was Murphy's and Jon's. Bingo, it's all central now without having to strip it down.
Great result.