Hi
my catch does not come out entirely just 1 mm it locks well but it is missing a few mm the spring is ok, I have polished catch…
Any idea ?
Thanks
Could be the wrong one. I think there may be two lengths for different diameter actions eg HW80 & 99 etc
Can't measure ours till weekend. Someone will know.
You could try and stretch the spring a little. Even if it just works temporarily.
Thanks all
Problem solved, just lightly unscrew the rear trigger guard screw I have screw too hard I think…
It sounds like the leg on the rear of the cassette which holds the safety needs knocking forward a touch, Marc.
As you're tightening the rear trigger guard screw you could be slightly rotating the cassette and leg onto the safety's shaft stopping it moving freely.
All the best Mick