-
Reproduction Adams revolvers!
-
Wonderful news!
But not quite correct, Andreas Baumkircher made beautiful reproductions of Beaumont-Adams revolvers some years ago, so this might be the second attempt in modern times.
Good luck to them!
Last edited by Ryde; 28-12-2022 at 08:33 AM.
-
i will put my name down for one
greenshoots
-
I picked up a 38 bore Adams dragoon revolver some time ago, engraving is worn but makers name and address is still visible and it is certainly in good enough condition to shoot. As the chamber's are actually bigger dia. than the bore they used a ball / conical bullet that has a small spur on them that attaches a felt wad that holds the bullet in the chamber. If I could get a mould ( original one ) I would be looking at £450 + so is just part of my collection. A lot of these were used by British offices in the Crimea, a lump of a pistol.
Mick.
-
Adams
First pics on the site looks very good in the white
Greenshoots
-
Id love to see a nitro one. lots of indoor club members would agree there I think.
Donald
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules