Results 1 to 6 of 6

Thread: Webley Pistols

  1. #1
    Join Date
    Nov 2012
    Location
    Walsall
    Posts
    408

    Webley Pistols

    Cross section reference; also noted in air piostols. Posted in general airguns info on some Webley pistol threads.

  2. #2
    ggggr's Avatar
    ggggr is offline part time super hero and seeker of justice
    Join Date
    May 2008
    Location
    Flintshire Ch6 sort of near bagillt
    Posts
    2,379
    Quote Originally Posted by abellringer View Post
    Cross section reference; also noted in air piostols. Posted in general airguns info on some Webley pistol threads.
    Webley Pistol Threads

    Following a request from a fellow member regarding the special threads on W & S air pistols namely the MKI; Senior and Premier 1: I have gathered as much info as I can and list it below, I understand the form is Standard Whitworth.
    0.106"Dia x 50 tpi S35 brl catch stop sc
    S22 brl jnt lock sc
    M32a brl jnt lock sc
    M32 tr adj lock sc

    0.150"Dia x 36 tpi M14 grip sc
    M15 sight sc
    S15 sight sc
    S13 & 14 grip sc
    S34 brl jnt sc
    M39 sight loc'n peg

    0.150"Dia x 50 tpi M31 tr adj sc
    P56 tr adj sc

    0.180"Dia x 50 tpi S21 brl jnt sc
    M23 brl jnt pin

    0.250"Dia x 30 tpi M212 piston sc

    0.853Dia x 24 tpi S10 & M9 breech sc
    Some may be for straight grip pistols, I don't have that info; but I hope this helps collectors in general
    Cooler than Mace Windu with a FRO, walking into Members Only and saying "Bitches, be cool"

  3. #3
    Join Date
    Feb 2001
    Location
    Winchester, UK
    Posts
    15,430
    Very useful information, thanks Ray.

  4. #4
    ggggr's Avatar
    ggggr is offline part time super hero and seeker of justice
    Join Date
    May 2008
    Location
    Flintshire Ch6 sort of near bagillt
    Posts
    2,379
    I wonder if any model engineers etc know of anyone who could make taps for some of these? I think probably the most useful one would be the barrel pivot one ad the threads are sometimes a bit mangled in the end cap/guide/ Maybe one for the grip screws as well?
    Cooler than Mace Windu with a FRO, walking into Members Only and saying "Bitches, be cool"

  5. #5
    Join Date
    Jan 2007
    Location
    Horley Nr Gatwick Surrey
    Posts
    201
    Try Peter Dyson he made me tap and die for the cleaning rods some time ago. He will make springs ect.



    Peter Dyson & Son Ltd
    3 Cuckoo Lane
    Honley
    Holmfirth
    Yorkshire, HD9 6AS (map)
    Tel: 01484 661062

  6. #6
    ggggr's Avatar
    ggggr is offline part time super hero and seeker of justice
    Join Date
    May 2008
    Location
    Flintshire Ch6 sort of near bagillt
    Posts
    2,379
    I'm just wondering if anybody else would be interested in getting some taps done? I'm also wondering at what sort of cost.
    Cooler than Mace Windu with a FRO, walking into Members Only and saying "Bitches, be cool"

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •