IPA should be alright as long as you use it sparingly, just let it dry fully before handleing the stock and do not use it over any printing.
Couple of other choices you could try first that should be laquer friendly, first which is oddest but also mildest, dishsoap and warm water, just dry well and keep off of any oiled parts as its a degreaser and then Bug and Tar remover for car paintwork, its something that should again be used sparingly but is intended to be used to remove stubborn stuff from laquered surfaces.
As with anything though always test on an inconspicuous area first so should anything go wrong its atleast somewhere its not noticeable.
Last edited by Segata; 17-05-2024 at 05:51 PM.
Reason: Dont type on meds kids
You'll Shoot your eye out Kid
Currently looking for an SMK/BAM B4-4 Rear sight or help modifying current one.
Wanted Daisy Model 25 or Norica Commando in reasonable condition.