Spring Bash May 17th and 18th May 2025

[BAD DAZ]

Anyone starting a sales thread, I've got 3 80's and a 95 to sell lol

[Trumpetier]

Anyone starting a sales thread, I've got 3 80's and a 95 to sell lol

Not yet mate, feel free to start one

[BAD DAZ]

I'm too shy 🤭

[Hellequin]

Anyone starting a sales thread, I've got 3 80's and a 95 to sell lol

For chuff's sake... someone keep me away from that sales table at the Bash! 🫣🤣

[CapitalBee]

Daz,


https://www.airgunbbs.com/showthread...h-sales-thread

[Waddy]

Anyone starting a sales thread, I've got 3 80's and a 95 to sell lol

Oh bugger, this is going to get expensive.








.

[TonyL]

Daz,


https://www.airgunbbs.com/showthread...h-sales-thread

Well done for getting it up and running, Mark.

[TonyL]

Anyone starting a sales thread, I've got 3 80's and a 95 to sell lol

Good job I'm skint!

[TonyL]

25 to go, peeps.

BOING!

[TonyL]

Oh bugger, this is going to get expensive.








.

Any further tinkering developments, Paul?

[TonyL]

How's MyLittlePaulyBoy doing?

Where IS Pete?


Any further news on AM03 tinkerings, Mark?

[CapitalBee]

How's MyLittlePaulyBoy doing?

Where IS Pete?


Any further news on AM03 tinkerings, Mark?

Hi Tone,
I'm just in the process of chasing my son for the cylinder, so I'll know more then. TBH, I've done some more on the Hatsan mod 60. I've had the barrel carbined and threaded 1/2"unf, so that's got to go back together this week. I'll have to add a couple of Hatsan barrels to the sales thread as I'd forgotten about them when posting it.

[Waddy]

Any further tinkering developments, Paul?

The chrono started working & I found a few moments. Tried cleaning the barrel in the 100 & tested it, the lube on the hammer must have loosened something, power is up but it's still all over, now turning the reg down quarter of a turn at a time to see if it settles down.

The 80 was doing 11.7 with the tbt spring, so I swapped the 2.75mm preload washer out for a .7mm metal washer I found, put it back together & it's making even more power Straight back to bits & looks like a coil is coming off. It had 55mm of preload with the preload washer in.

The 3D printed butt hook I bought off the sales thread arrived today, looks brand new It looks great on the end of the 3/4 finished beech stock that I made for an Airmagnum carbine PCP conversion, I might actually get the ruddy thing finished now I have that.

Edit,

Took half a coil off the 80's spring as a whole coil seemed a lot, it's now 11.5 with F&N ftt, and less with other pellets. The 100 has now stabilized after more Napier airgun lube on the hammer & the reg being turned down, it's at 10.4 so I'll try turning the reg up a tad.

[NewPaul]

How's MyLittlePaulyBoy doing?

Where IS Pete?


Any further news on AM03 tinkerings, Mark?

I’m doing very well thanks matey, mobility coming along in leaps and bounds (ish ), no pain that I can’t manage, just tired a lot still and a bit of upset tummy due to meds and not having much of an appetite so I’m probably eating all the wrong stuff. Well on the mend though.

[TonyL]

Sounding excellent, Pauly.

I hope your tummy issues are a thing of the past very soon.