Spring Bash May 17th and 18th May 2025

[Neil54]

14 sleeps, better get stuff ready then!

[Chippendale]

Which field is the next Bash being held in please?

I have only been to the two by the pond.

Cheers

Melv

Chippendale

[TonyL]

Details on the opening post, Melv.

Be great to see you again.

[gtfreight]

I've not seen Gav posting on here for a while.
Are you going to be making an appearance my friend?

[CapitalBee]

Excellent stuff, Mark. I bet that Hatsan ends up being very nice by the time you've finished your tinkering.

I will, of course, look forward with great interest to the AM03 updates and your preferred tuning route.

Well, I got the cylinder back from the youngest son yesterday evening, minus the tamperproof grubscrew that was choking the tp. So, decided on a 3mm tp change. Cut some 4mm o/d tube and after an acetone wash of both parts, I bonded it in place. I left a little of the brass tube proud of the breech face and using a needle file dressed it flush to the original face. So, all back together and post dieseling it's doing a healthy 11.8ft/lbs with 1.4gn pellets. Cycle has improved and I've added the backdraft moderator, which has quietened things down a bit. I've fitted a hefty 2.5-10x32 scope and am just experimenting with pellets (just about to continue with some FAP's). Overall, very happy with the outcome. I'll bring it to the bash for perusal.

[Dornfelderliebe]

14 sleeps, better get stuff ready then!

Oh bugger I'm nowhere near ready.