What on earth is that, a BAR? WW2 US m/c gun? CP 88?
Does anybody know what the silencer that BAR sell for the CP99 is made of is it alloy,plastic, or maybe even nobendium
I have a plan for one assuming its not plastic and reasonabley well built.
Cheers
Vince
What on earth is that, a BAR? WW2 US m/c gun? CP 88?
Blimey didnt realise they had internet access in pubs nowadays!!!
Damn newbies
I bought my CP99 and silencer from BAR. The silencer is the genuine Umarex one supplied with an adapter that fits on the front of the pistol. It is fatter and shorter than the usual ones for CO2 pistols but as it's completley hollow it dosent silence very much.
I tried the one from the S16 I used to have and that worked much better
You will need the adapter as it replaces the front plate at the end of the barrel, even if you fit a different silencer later. I would recomend a light weight one, carbon fiber, or the balance will be bad. It's a standard 1/2 inch female silencer.
Cheers
PS it's made of alloy.
Last edited by Snooper601; 16-03-2006 at 10:20 PM.
Snooper601 Suspect a simple fault, or a simple engineer He who dies with the most toys wins!
QHAC Official lubricant development engineer.
Hey, I looked it up - It's a co2 lookalike real pistol that goes 'pop' 'pop' in the open air and 'popp! 'popp! indoors, Why does it need a silencer? The only thing frightening about it is its pop anyway! Still
To keep the neighbours happy?Originally Posted by Freezer
Cheers
Snooper601 Suspect a simple fault, or a simple engineer He who dies with the most toys wins!
QHAC Official lubricant development engineer.
See you Sunday, off down the pub!
Cheers for the replies snooper601, im not worried about the adapter plate as i plan to put it on something else im just interested in what its made of to find out if it would be quite sturdy. Also another question, is it possible to open it up?? to maybe put a baffle or 2 in??
Just an idea im playing with
One of the local club members bought one and it seemed to be a single piece of metal. If you want something similar but openable then a Soundbiter is a good choice - made from black plasticky stuff, 105mm long, 28.5mm diameter, 3.5mm thick walls with 3 springs and 2 washers inside.
Jonathan
Cheers Jonathan thats the info i wanted. Ideally im trying to find a very short basic (cheap ) silencer to butcher for a project the shorter and the smaller the better. I had an RWS Manders mod that would have been ideal but i sold it a few weeks ago
We did extensive tests one Satuarday years ago
@ Lea Valley Air Gun Club - Hertford
www.lvagc.com
Mostly through the contents of Supermicks then Car boot and collection of Gun's and varied Silencers
And found that the Little Sound Biter originally made for
.22 Rim Fire was one of the most effective Silencers
Especially for pistols @ 4 1/2 Long and being light as well
Yes it is a standard 1/2 UNF Female connector
Yes @ I still have Stock
BOB/R
The adapters will be available on their own very soon as the silencer part is a bit pants . As the adapter is 1/2unf, you could fit a nice weirauch silencer