Could prove difficult to get an "off the shelf" spring and guide kit for the Mercury, but Knibbs makes a rear guide that is supposed to fit better than the original, just make sure to find a spring that matches.
Could prove difficult to get an "off the shelf" spring and guide kit for the Mercury, but Knibbs makes a rear guide that is supposed to fit better than the original, just make sure to find a spring that matches.
Too many airguns!
How about back to tradition and make a coke bottle sleeve? Love my Mercury which a cousin pinched for his farm. Main issue was barrell wobble which a vise will sort. I think many years back Bowkett did a mod which replaced the barrel pin with a bolt that could be tightened.
good luck with your mercury great guns
Chambers used to do a uning kit which you could chose the spring etc. on and came with green nylon bushes etc., which worked brilliantly in a MK3 Mercury I had a few years ago, highly recommended.
ATB, ED
Just what I fitted to my Mercury S back in January 2020 and a very smooth shooter it is, as witnessed by a fair few people who tried it at last weekend's Boinger Bash. Highly recommended.
Be prepared to have to replace the piston 'O' ring & buffer and the breech seal. If it has a nylon piston head unit I think most replace with the alloy one? Re the breech seal, I'd go fir a genuine BSA one. Weihrauch ones can, reportedly, work very well but may need slightly altering?
If the piston buffer has degraded and turned to mush, the piston may take a little persuading to see daylight!
And a good few people recommend increasing the stroke slightly by shortening the central piston rod and drilling a new hole for the head fixing and doing away with the buffer altogether. Just ensure there's sufficient clearance between the rear of the cocking lever and the slot in the piston if doing this.
Hope this helps.
THE BOINGER BASH AT QUIGLEY HOLLOW. MAKING GREAT MEMORIES SINCE 15th JUNE, 2013.
NEXT EVENT :- August 3/4, 2024.........BOING!!