Results 1 to 13 of 13

Thread: Removing harden glue form barrel

  1. #1
    Join Date
    Oct 2009
    Location
    Horley
    Posts
    784

    Removing harden glue form barrel

    Have been asked to clean a gun easily enough I thought.
    It has had camo tape along the barrel and silencer and it had been there for some years.
    The tape came off ok but it has left the harden glue residue.
    Any ideas how to remove this crust without damaging the blueing?
    Cheers Sidelever
    Diana 52 .22 short stroked
    AA S410.177+Hawke Vantage
    Think outside...no box required

  2. #2
    Join Date
    Apr 2020
    Location
    Leeds
    Posts
    736
    Try softening it up with a hair dryer, heat gun might be too brutal, roll it off when soft, we used to do this with car stickers. Be wary with solvents, should be ok on decent bluing, but painted surfaces depend on what's been used, try small bit outta sight first

  3. #3
    Join Date
    Apr 2010
    Location
    Anglesey/holyhead
    Posts
    1,575

    Removing harden glue form barrel

    Acetone(nail varnish remover)make sure it's pure with no additives.

  4. #4
    Join Date
    Jan 2011
    Location
    Swansea
    Posts
    5,045
    Quote Originally Posted by wil95k View Post
    Acetone(nail varnish remover)make sure it's pure with no additives.
    As above. Worked well when i used it inntge past.

  5. #5
    Join Date
    Dec 2009
    Location
    leicester
    Posts
    1,552
    As it's hardened do no use heat , Acetone or MEK will soften it enough for you to wipe it off , Nail varnish remover normaly is Acetone with something like Lanolin added , Use that as it is the solvent acting on softening the residual glue so you can wipe it off , wrap it in paper towel's and drizzle the solvent on to the towels and leave for 10 min and then wipe off.

  6. #6
    Join Date
    Jul 2012
    Location
    cambridge
    Posts
    905
    Depends a bit on what the composition of the adhesive is. Acetone, MEK are worth trying, iso propanol might be worth trying too. I've had success with white spirit & also that very popular spray lubricant **40. As has been said try to leave it on to soften, the paper towel trick works well but some solvents evaporate very quickly, especially in the warm weather, watch out for fumes/ flammability, avoid the vapours & be aware of the H& S issues, some are nasty chemicals......

  7. #7
    Join Date
    Feb 2022
    Location
    Halifax
    Posts
    333
    Quote Originally Posted by trajectory View Post
    Depends a bit on what the composition of the adhesive is. Acetone, MEK are worth trying, iso propanol might be worth trying too. I've had success with white spirit & also that very popular spray lubricant **40. As has been said try to leave it on to soften, the paper towel trick works well but some solvents evaporate very quickly, especially in the warm weather, watch out for fumes/ flammability, avoid the vapours & be aware of the H& S issues, some are nasty chemicals......
    Be extremely careful if you use MEK, as it's known to be carcinogenic.

  8. #8
    Jesim1's Avatar
    Jesim1 is offline Likes to wear driving gloves in the bedroom
    Join Date
    Dec 2013
    Location
    Wigan
    Posts
    4,939
    Quote Originally Posted by wil95k View Post
    Acetone(nail varnish remover)make sure it's pure with no additives.
    Quote Originally Posted by WILBA View Post
    As above. Worked well when i used it inntge past.
    Another vote for "pure" acetone - not nail polish remover as it often has softeners and other crap in it
    Making a mockery of growing old gracefully since I retired

  9. #9
    Join Date
    May 2009
    Location
    Lairg
    Posts
    4,906
    In order of potential hazard. Try WD40 first, then paraffin then petrol and then cellulose thinners or acetone or MEK. One of those should shift it.

  10. #10
    Join Date
    Dec 2018
    Location
    Hull East Yorkshire
    Posts
    1,396
    wd 40 .
    HW 77K .22,Gammo Hornet .22 BSA 3-9 x 50 Night light ,HW 40 .177,Gamo Maxxim Elite .22 multi shot, Beeman P17 .177 red dot sight ,SMK CP2 co2 with Hawk 3-9 x 50.Slingshots PPMG+TTF PPMG mk 2 ott PPMG ott Original custom made solid Bronze, Number 15 of 20

  11. #11
    Join Date
    Oct 2009
    Location
    Horley
    Posts
    784

    Hardened glue

    Many thanks to all who replied.
    I’ll start with the safest one **40 hopefully that will work before I need to use MEK.
    I know that is whiffy stuff they use it at work cleaning aircraft surfaces.
    Atb Sidelever
    Diana 52 .22 short stroked
    AA S410.177+Hawke Vantage
    Think outside...no box required

  12. #12
    Join Date
    Feb 2022
    Location
    Birmingham
    Posts
    145
    I use Parker Hale 009 Spray and 000 Wire Wool, works perfectly

  13. #13
    Join Date
    May 2005
    Location
    Hounslow.
    Posts
    4,007
    Petroleum jelly otherwise known as Vasaline is worth a try.
    Give the said area a liberal coating and leave for a few hours.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •