original mod 50 T01

[dvd]

Make a tank then it's a lot easier !

Exactly.

[wil95k]

Exactly.

That would mean me getting someone to make me one,and extra burners,more cost.It was just a simple question if it can be done.Jees!

[deejayuu]

Hm! Rattled my bin lid now. Will have a look at ours but may be different to TO1. What say you 'Wil'

[Geezer]

Hm! Rattled my bin lid now. Will have a look at ours but may be different to TO1. What say you 'Wil'

That’s a regular 50, not a T01.

[crowbar]

If you have anything to say put it on open forum not p.M.

[deejayuu]

Looks simple enough on ours. Two 3mm pegs, soft enough to drill, to register and fix the, probably, interference fit barrel.
As said, don't know if TO1 is same.

[robs5230]

I'd say unless you are very sure how the barrel is fixed in the action, leave well alone.

I rebarrelled a 52 some years ago.
The barrel was fixed with a cross pin, but was also fitted on splines. That barrel needed pressing out after the pin was removed.

[wil95k]

Looks similar jules,I think i'll leave it as is,I haven't the confidence,to start drilling stuff give me some timber i'd be ok

[wil95k]

I'd say unless you are very sure how the barrel is fixed in the action, leave well alone.

I rebarrelled a 52 some years ago.
The barrel was fixed with a cross pin, but was also fitted on splines. That barrel needed pressing out after the pin was removed.

I think that is good adviceThank you.