I know where there is a Uragan compact and for just over £100 I could swap out the cylinder to a 300cc with a good mod it would be a midi lather than a long or a compact
I know where there is a Uragan compact and for just over £100 I could swap out the cylinder to a 300cc with a good mod it would be a midi lather than a long or a compact
Acta non Verba
You need a dedicated adapter to fit a 300cc bottle and I only know one person who makes them. (I have a spare as I bought two.)
You also need a complete replacement shroud as the Best Fittings 300cc bottle is a sufficiently larger diameter than the standard one that it won't fit with the standard shroud.
The photo shows how it looks. The top gun isn't mine and has a 300cc bottle and 30mm shroud, the lower one is mine with standard bottle and 30mm shroud.
I had the uragan, well built compact and fairly accurate, trigger was good for bullpup, noise level wasn’t to bad, preferred my Steyr which was better in many ways imo
Snapshot could you post some photos , wont the original bottle valve unscrew and just screw on a larger capacity one ?
Acta non Verba
ive got vulcan 2 with black plastic stock
its not light its a hefty lump but shoulder s well
now looking at the AgtVIXEN and Airmaks KATRAN & Caiman
Hopefully these will be at the Shooting Show for me to shoulder
The original bottle is very light compared to others and has a very short neck so the adapter is bonded to it, presumable to save more weight by having fewer threads. I suspect it's also a smaller thread than the usual M18. There's no valve in the adapter so the bottle has to be drained to be removed.
What would you like photos of?
Hi snapshot ,I couldn’t see your photos before when I looked , thanks
Acta non Verba
Bought the uragan today and a lovely mdt buttstock for my Raw
Acta non Verba