If the seals are all O rings see your local bearing & seal factors, I use City Seals in Rotherham & they've always been able to match O rings in high durometer Viton for HPA use,
Regards,
Nick
Hi,
I have just bought an older (Fixed Air Tube) Morini CM162E Match Pistol.
But the cylinder leaks air at over 150Bar and it looks like the whole gun could do with new seals. I suspect they have never been changed from new.
I am happy to do the work myself. I have already stripped the air tube down. The pistol is easy to work on.
Who would you recommend to contact for the seal kit please.
I have emailed Morini and Surrey Guns but so far no response?
Thanks
Mark
If the seals are all O rings see your local bearing & seal factors, I use City Seals in Rotherham & they've always been able to match O rings in high durometer Viton for HPA use,
Regards,
Nick
Airgun Repairs, Bespoke Airgun Smithing and Precision Engineering Services
http://www.magic9designltd.com
I have a list of sizes for most of them.
Morini CM 162E O-Ring Sizes
162020A MORINI 0-RING 8 X 1.5mm (Filler Seal Green Viton 1Off)
162007A MORINI O-RING 12 x 1.5mm (Air Cylinder Body to Gun 1Off)
162008A MORINI O-RING 23 x 1.5mm (Air Cylinder Seals 2off)
162027A MORINI O-RING 3.5 x 1.2mm (Pellet Probe 1Off)
162020B MORINI O-RING 3.8 x 1.2mm (Internal Fill Valve Seal)
162052A MORINI O-RING 5.5 x 1.5mm (Firing Valve Seal 1off)
162001A MORINI O-RING (Barrel Seal 2Off)
162010A MORINI O-RING (Air Cylinder Air Release Unit Green Viton 1Off)
The bottom two I don't know though.
Thanks
Mark
Now sorted thank you.
Direct from Morini for 35€ . At least I will get the correct sizes.
Thanks
Mark