Page 1 of 6 123 ... LastLast
Results 1 to 15 of 90

Thread: Stroke lengths, TP sizes and SCR for various springers...

  1. #1
    Join Date
    Jun 2011
    Location
    Hatfield Broad Oak, Essex/Herts CM22
    Posts
    3,967

    Stroke lengths, TP sizes and SCR for various springers...

    OK guys, with all this talk of SCR etc... How about we put a list together of the standard stroke lengths, bore sizes and TP sizes?

    I've got ones for a HW 77/97 and a 95 (HW80 + HW35 added) so far.... Would be interested to know them for the 99, 80, 55, TX/Prosport old and new, LGV etc....

    I'll need: Model - Bore size (B) - Stroke Length (S) - Transfer Port Diameter x Length (TP) - Piston weight in grams without the liner but with the seal.




    Standard rifles
    Model Bore D (mm) Stroke (mm) Swept Vol.(cc) TP D x L (mm) TP Vol. (cc) SCR Piston(g) Caliber Notes
    HW77/97 early 25 81 39.76 3x6 0.042 938:1 235 - up to serial number: 1446048 - Some rifles have 2.9, 3 or 3.1mm TP
    HW77/97 Late 26 81 43.01 3x6 0.042 1014:1 265 - From serial number 1446049 - Some rifles have 2.9, 3 or 3.1mm TP
    HW95 26 85 45.13 3x15 0.106 426:1 254 - -
    HW80 30 80 56.55 2.9x11 0.073 779:1 - - -
    HW35 Early 30 65 45.95 4x26 0.327 141:1 - - Leather seal (up
    to serial number 843636)
    HW35 Late 30 65 43.83 2.8x26 0.160 274:1 - - Synthetic seal (843637 on)
    TX200 (MK1+2) 25 84 41.23 3.65x9.8 0.103 403:1 a bit more than 225? - Additional Top Hat weight.... not sure of weights. Piston will weigh more due to longer piston rod.
    TX200 (MK3) 25 98 48.11 3.65x9.8 0.103 470:1 225 - .177 add 27g top hat, .22 add 16g for top hat
    Webley Vulcan 27 79 45.23 2.5x19 0.093 485:1 - - -
    Webley Hawke 25 79 38.78 4x16 0.201 193:1 - - -
    Westlake B2 25.4 80 40.54 4x28 0.352 116:1 - - -
    HW99S 26 71 37.7 3x17? 0.120 314:1 235 - 225 - 225g piston with seal and no liner. Add 10g if you leave the weight inside the piston.
    Modified Rifles below
    HW35LGV 25 71 34.85 4x6 0.075 463:1 - .177 Walther LGV Piston - Conversion by Mick (T 20)
    HW77/97 early 25 81 39.76 3.9x6 0.072 555:1 235 - TP opened up to 3.9 as suggested by Bigtoe01
    HW95 26 85 45.13 3.6x15 0.153 296:1 254 - TP opened up to 3.6 as suggested by Bigtoe01
    HW35 Early mod. 30 62 43.83 4x26 0.327 135:1 - - Synthetic seal convention (Chambers etc)
    model Bore stroke Swept Vol. TP dims 0.042 scr Piston Weight Caliber notes
    Last edited by brucegill; 10-01-2014 at 12:10 AM. Reason: Will update this post as new info comes in :)

  2. #2
    Join Date
    Apr 2012
    Location
    Retford, Notts
    Posts
    34,636
    BRILLIANT IDEA BRUCE!

    And, you're right, why not extend this to as many different rifles as possible, as a quick reference guide.

    Maybe even an excellent idea for a sticky, chaps?
    THE BOINGER BASH AT QUIGLEY HOLLOW. MAKING GREAT MEMORIES SINCE 15th JUNE, 2013.
    NEXT EVENT :- May 4/5, 2024.........BOING!!

  3. #3
    Join Date
    Feb 2012
    Location
    essex
    Posts
    1,775
    It's really weird brucy boy as this is exactly what has been going on in my head too the past few nights!

    Strange!

    I would also love to have a list of this info, to suss a few things out that I've been wanting to experiment with, and generally get my head around.

    ( why am I never happy to just shoot my bloody guns!)

  4. #4
    Join Date
    Jun 2011
    Location
    Hatfield Broad Oak, Essex/Herts CM22
    Posts
    3,967
    Quote Originally Posted by TonyL View Post
    BRILLIANT IDEA BRUCE!

    And, you're right, why not extend this to as many different rifles as possible, as a quick reference guide.

    Maybe even an excellent idea for a sticky, chaps?
    thanks matey. Just added the 80..... Might ad the SCR as well.... Now I've got my head around the sums lol

    Quote Originally Posted by Dan944 View Post
    It's really weird brucy boy as this is exactly what has been going on in my head too the past few nights!

    Strange!

    I would also love to have a list of this info, to suss a few things out that I've been wanting to experiment with, and generally get my head around.

    ( why am I never happy to just shoot my bloody guns!)
    ay up Danny boy there's good reason to tinker matey. The day we're happy with something as it is, is the day I'll get bored and find a new hobby lol.

  5. #5
    Join Date
    Feb 2012
    Location
    essex
    Posts
    1,775
    Quote Originally Posted by brucegill View Post
    thanks matey. Just added the 80..... Might ad the SCR as well.... Now I've got my head around the sums lol



    ay up Danny boy there's good reason to tinker matey. The day we're happy with something as it is, is the day I'll get bored and find a new hobby lol.
    You know that Bruce!!!

  6. #6
    Join Date
    Jul 2005
    Location
    Flitwick, Bedfordshire
    Posts
    278

    Great idea, would be very useful and interesting.

    Quote Originally Posted by TonyL View Post
    BRILLIANT IDEA BRUCE!

    And, you're right, why not extend this to as many different rifles as possible, as a quick reference guide.

    Maybe even an excellent idea for a sticky, chaps?
    Perhaps you could also include things like piston weight, std spring dia., gauge and coils?

  7. #7
    Join Date
    Jun 2011
    Location
    Hatfield Broad Oak, Essex/Herts CM22
    Posts
    3,967
    Quote Originally Posted by rich_morris View Post
    Perhaps you could also include things like piston weight, std spring dia., gauge and coils?
    Piston weight would be a nice idea!

    look here for spring details:
    http://www.airgunbbs.com/showthread....ng-data-thread

    If people add the info we need to this thread I'll happily amend the first post so people can find what they need with out trailing through the thread.

  8. #8
    Join Date
    May 2008
    Location
    Quigley Hollow, Nuneaton
    Posts
    17,111
    Hi Bruce

    Some more numbers for you

    Wehrauch HW 35 leather seal --------------- transfer port = 4mm ID X 26mm ---- Cylinder = 30mm ID X 65mm stroke

    Weihrauch HW35 synthetic seal ------------- transfer port = 2.8mm ID X 26mm -- Cylinder = 30mm ID X 65mm stroke

    ^^^^^^^^^^^^^^^^^^
    These are not carved in stone


    Weihrauch HW35 synthetic conversion kit ---- transfer port = 4mm ID X 26mm ---- Cylinder = 30mm X 62mm stroke

    Weihrauch HW35LGV ------------------------ transfer port = 4mm ID X 6mm ----- Cylinder = 25mm X 71mm stroke





    All the best Mick

  9. #9
    Join Date
    Jun 2011
    Location
    Hatfield Broad Oak, Essex/Herts CM22
    Posts
    3,967
    Quote Originally Posted by T 20 View Post
    Hi Bruce

    Some more numbers for you

    Wehrauch HW 35 leather seal --------------- transfer port = 4mm ID X 26mm ---- Cylinder = 30mm ID X 65mm stroke

    Weihrauch HW35 synthetic seal ------------- transfer port = 2.8mm ID X 26mm -- Cylinder = 30mm ID X 65mm stroke

    ^^^^^^^^^^^^^^^^^^
    These are not carved in stone


    Weihrauch HW35 synthetic conversion kit ---- transfer port = 4mm ID X 26mm ---- Cylinder = 30mm X 62mm stroke

    Weihrauch HW35LGV ------------------------ transfer port = 4mm ID X 6mm ----- Cylinder = 25mm X 71mm stroke





    All the best Mick
    Many thanks Mick! Great to have your modded 35 in there too

    Finally worked out how to add tables in HTML so will do the sums for SCR ASAP.

    Have amended the threads title so we can include AA, LGV etc.... If we can get this going it'll be a cracking point of reference.

    If anyone thinks of another column, let me know now as its a PITA to add later
    Last edited by brucegill; 06-01-2014 at 02:57 PM.

  10. #10
    Join Date
    Jun 2011
    Location
    Hatfield Broad Oak, Essex/Herts CM22
    Posts
    3,967
    One I'm very interested in is the 99s!

    Also the LGV, TX etc...

  11. #11
    Join Date
    Aug 2008
    Location
    Honiton
    Posts
    1,328
    Nice idea,
    as well as standard figures listed for each model, do people on here have "optimized" figures for say 11.3ftlb running sweetly that could be added along side or is there no such thing as optimum!!!!!

    Atb,Woody.
    Last edited by nat1; 07-01-2014 at 09:37 PM.

  12. #12
    Join Date
    Jun 2011
    Location
    Hatfield Broad Oak, Essex/Herts CM22
    Posts
    3,967
    Quote Originally Posted by nat1 View Post
    Nice idea,
    as well standard figures listed for each model, do people on here have "optimized" figures for say 11.3ftlb running sweetly that could be added along side or is there no such thing as optimum!!!!!

    Atb,Woody.
    Thanks bud. Not sure if there's an optimum for a set power..... Hopefullyone of the guys who understand this more will post

    just about to add SCR values.

  13. #13
    Join Date
    Jun 2011
    Location
    Hatfield Broad Oak, Essex/Herts CM22
    Posts
    3,967
    Ok, added SCR's for the rifles listed so far......


    Can someone check my figures? I'm getting confused! (Have made a spread sheet up so its all automated....)

    Looking at the SCR for say the early 77 and the 80, the 80 should shoot nicer than the 77 Or at least it's closer to the preferred 300:1-500:1

    I'm guessing Piston weight must be playing a major factor here!

  14. #14
    Snooper601 is offline I likes to polish my trophy
    Join Date
    May 2005
    Location
    Dunstable, Beds
    Posts
    5,761
    Quote Originally Posted by brucegill View Post
    Ok, added SCR's for the rifles listed so far......


    Can someone check my figures? I'm getting confused! (Have made a spread sheet up so its all automated....)

    Looking at the SCR for say the early 77 and the 80, the 80 should shoot nicer than the 77 Or at least it's closer to the preferred 300:1-500:1

    I'm guessing Piston weight must be playing a major factor here!
    Hi Bruce, its probably worth adding a swept volume column to save calculator punching

    The SCR is difficult as the target value depends on port length as the gas flow through the port is restricted more by a longer port, it's an indicator of when it will slam or bounce.

    Cheers

    John
    Snooper601 Suspect a simple fault, or a simple engineer He who dies with the most toys wins!
    QHAC Official lubricant development engineer.

  15. #15
    Join Date
    Oct 2009
    Location
    Stockport
    Posts
    6,058
    95/98/new 85 are 85mm stoke, not 86, all depends what seal is fitted obviously

    If I get a chance i will boot the old machine up and get my notes off it, however only the stock stuff, not what i set.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •