Curse these bullpups!

[Hsing-ee]

Meh! Had Ultras, they're ok. No very exciting though innit

I have an Original Diana 50 that someone has converted to sliding breech loading. It's got an excessive chamfer on the barrel throat, and its doing 2.5 fpe. If the sear/cocking lever lets go while you are loading it you will DEFINITELY loose your fingertips. Its dead exciting. Fancy that?

[TonyL]

Are you sure you don't want to "convert" a nice, little AA 410, Nick?

[tinbum]

Are you sure you don't want to "convert" a nice, little AA 410, Nick?

I know where you live

[Trumpetier]

I thought you were getting an old Falcon ?

[tinbum]

I thought you were getting an old Falcon ?

If could find the two shot doodad I've been fixating over I would. Imagne, a two-shot MPT in .22....

Ooh, I need a lie down

[Hsing-ee]

If could find the two shot doodad I've been fixating over I would. Imagne, a two-shot MPT in .22....

Ooh, I need a lie down

Now you are in a vulnerable position, have you considered an HW35 Export? Sometimes what we need is the exact opposite of what we want...

[tinbum]

Now you are in a vulnerable position, have you considered an HW35 Export? Sometimes what we need is the exact opposite of what we want...

My Christmas card list is getting shorter.

[wafu63]

Have a look at the Edgun Leshiy, more money yes but buy cheap, buy twice. (JOHN RUSKIN.)

[icemangav13]

ive currently got a p15 and have previously had a puncher breaker mark 2 was a little heavy didn't find it too bad though synthetic stock is nice

[TonyL]

I know where you live

Mmmm........oops!

[Shed tuner]

I have an Original Diana 50 that someone has converted to sliding breech loading. It's got an excessive chamfer on the barrel throat, and its doing 2.5 fpe. If the sear/cocking lever lets go while you are loading it you will DEFINITELY loose your fingertips. Its dead exciting. Fancy that?

I remember you buying that....

[Hsing-ee]

I remember you buying that....

I've GOT to have it apart and see how it was done. I have a feeling its just a big block of alloy with a 40mm long transfer port in it.

It's sort of a hymn to Lost Volume.

[tinbum]

I have an Original Diana 50 that someone has converted to sliding breech loading. It's got an excessive chamfer on the barrel throat, and its doing 2.5 fpe. If the sear/cocking lever lets go while you are loading it you will DEFINITELY loose your fingertips. Its dead exciting. Fancy that?

[IMG][/IMG]