Is it the tang type?
Help - Wanted.
I wonder if anyone could help me find/locate/purchase/beg/steal the trigger guard for a 1936 B.S.A. break barrel ?
I've tried Mr Knibbs and Protek with no joy.
Thanks, in anticipation,
Barrie
Regards,
M151A1
Is it the tang type?
The front of trigger guard is secured to the spring housing part of the main cylinder by two screws and the rear of the trigger guard is dovetailed into a slot between the trigger housing and the stock.
(hope that makes sense !)
Barrie
Regards,
M151A1
Ah ok, I have a spare tang type but not the other type. The one you describe come in two sizes. Some had the small slot and others a larger slot for the rear of the trigger guard.
Look on E bay, there are always some on there.
.......and the next question
What main spring should I use ?
Barrie
Regards,
M151A1
Measure the old Spring, Barrie, and then try to match it up from here. :-
http://www.airgunbbs.com/showthread....ng-data-thread
All the best Mick