Venom Mach 1 . 19 made 8 now i the UK .Venom Mach 2 . 9 made think 5or 6 in the UK.
.22 Venom Mach 1 (FAC) 6-25x56 Millett.
.22 Venom Mach 2 Thumbhole 6.5-20x40 Leupold EFR.
.22 Venom Mach 2 Sporter 4-12x40 Leupold.
.177 Venom Vantage 4-16x50.
.177 Venom Daystate 8-32x56 AGS.
.22 Venom Datstate 4-16x56 AGS.
.22 Webley Venom FX2000 6-18x40 Busnel Legend.
.177 Titan MPT by Steve Pope 6-24x40 Tasco.
.177 Pro-Sport 4-16x50.
.22 Webley FX2000 3-9x33 Leupold EFR.
.177 Logan Solo 4-16x50.
.22 HW90 (spring powered) 4-16x50
.22 Gamo Stutzen.
.177 Walther lever action.
Since my first post on this thread, I've added a few interesting specimens - a Pro Elite in .177 and what I'm lead to believe is a one-off Ripley sporter which has 'Special Hunter' emblazoned along the left side of the breech block!
Today I had a chat with a bloke who still shoots a laiser 12, a .177 single stroker (full power) from the late 80's. The only other he knows of was owned by a G. Bluck who went on to 'invent' the PH Dragon...
Best Regards
Simon
I've got some slug guns.
Surprised to see the Midas cropping up as 'rare' - I thought they made plenty of those?
My first PCP was a Midas FT with a brass reservoir: not seen many of those, and boy was it fron heavy!
Derek
Daystate Merlyn LE#12+Zeiss Conquest 4.5-14x44 MC
AA400 carbine, Zeiler 8-32x44
Swallows FTC. 'darn 'sarf..
.21 calibre.A midget but nicely cased
A b2 that works
Still in love with my Daystate Merlyn LE - not as rare as some, but still number 12 of only 50 (60?) made..
Derek
Daystate Merlyn LE#12+Zeiss Conquest 4.5-14x44 MC
AA400 carbine, Zeiler 8-32x44
Swallows FTC. 'darn 'sarf..
I have recently obtained Ben Taylor's prototype FWB Sport 124 with a Gas Ram fitted by Ben
A real 'One off' made for FWB as an experiment.
As previously mentioned, My TDR is rare too, Hydrographics have only made 10 .177 dipped ones and mine is the only BTAS regged one out there
My Cyclone and RWS500 will be rare for a while, soon, as I am having the first GinB stocks made at the moment
Cheers
John
Last edited by Snooper601; 18-08-2007 at 11:22 PM.
Snooper601 Suspect a simple fault, or a simple engineer He who dies with the most toys wins!
QHAC Official lubricant development engineer.
Cheeky git!
Since my previous posts re Sharp Pan Target and factory l/h Pro Sport I have captured the only known () BSF model 65 and a one-off Webley Omega with a factory fitted adjustable gas ram system. A prototype which came from last years Webley auction.
ATB
Ian
Last edited by I. J.; 18-08-2007 at 04:09 PM.
Founder & ex secretary of Rivington Riflemen.
www.rivington-riflemen.uk
Mine is probably a Ripley AR5 in .20 calibre, full left hand and-wait for it--serial number 001.
'It may be that your sole purpose in life is to serve as a warning to others'.
I have a .22 Pro Elite that is drilled and tapped for rear iron site out of the box. Also a .177 Pro Elite putting out 19.9 ft. lbs.. TX200 Mark1 #00321. Have a Pro Sport with a lefty Jim Macarri stock. He was making it for Mr. Saunders of Air Arms when they parted ways so I now have it. Also an old R1 with only 2 scope stop pin holes. None are really rare, but it's the best I have.