All 30mm tubes.
8-40x56. What Diameter tube are these 25.4mm or 30mm?
Ray![]()
Last edited by Ray J; 19-07-2005 at 07:05 PM.
All 30mm tubes.
Some geezer did a review.
Here it is.![]()
Join the Free Speech Union
''All that is necessary for evil to triumph is for good men to glaze over and resume scrolling''.
Thank's Snock, enlightening.
Ray![]()
Best scope i ever had until Deben snatched it back and palmed me off with numerous inferior mark 2's.
Still got a Mark 1 somewhere.
Originally Posted by Ray J
![]()
.
Join the Free Speech Union
''All that is necessary for evil to triumph is for good men to glaze over and resume scrolling''.
OK - I'll bite! I bought one last Sunday - it seems better than the one I had years ago, for clarity. The sidewheel has no slop, either. What is the difference/distinguishing features? My old one had very thin cross-hairs and tiny central dot (I liked it a lot). The "new" one has a duplex reticle i.e. thick posts/thin lines. I'm curious.
Keith
Mk1 - 1/8 moa Mk2+3 - 1/4 moa
Mk2 - made in China under eyebell.
Mk3 - made in Japan under eyebell.
Thanks Darren
CU840Y56 (should be "x"?)
Made in Japan
H-05 11
Does that say anything extra?
Keith
Not to me Keith![]()
Aha - just took the windage turret cover off, that's how much I've looked at it - been busy! 1/8 MOA. Whoopee! I said it was better than one I had about six years ago, too!
Keith![]()
I jujst hope the windage turrent cover is original - funny thing is though, it says "UP". I'll have a look under the modified (large) top turret cover soon, maybe there's one there that says "Right"??!!
Keith
The Mk1s are widely regarded as the best. I believe swapping the turrets when the markings wore out was fairly common too.
I think you're right - I had to go out for my Allen keys, the turrets are swapped over. The odd thing is there is what looks like a very shiny, new-looking "Inspected by Asia Optics" sticker under the turret region.
Keith