Originally Posted by
enfield2band
A friend of mine has two. I have e-mailed him for the info.
I'll get back to you if no one beats me to it.
His reply:-
That would probably depend on what Make of Colt Walker he as , as they are not all identical some parts might be and others might not be ... Bernard from Stockport who comes to Pinner as a Colt Walker and he needed a wedge for his Colt Walker as the spring on it had broke , Kranks gave him 2 wedges but they were both different and would not fit his Colt Walker , and my Colt Walker wedge was different size than his . He gave me the 2 wedges kranks had given him as they were no good to him and they would not fit my Colt Walker . So I removed the springs from the 2 kranks wedges and fitted one of the springs to Bernards Colt Walker wedge and the other spring I fitted to my Colt Walker wedge as that needed a new spring . So not every make of Colt Walker are the same when it comes to parts . It’s funny that he needs the 2 pins for his Colt Walker as they are a tight fit in the frame . He would be better measuring the holes in the part of the barrel that goes over the pins in the frame . I can get my ASM Colt Walker pins width but I can only measure how far they stick out as trying to get them out of the frame just to measure how long they are would probably knacker the outside part of the pins up as you would probably have to use grips on them to get them out . If he measured the holes width on his Colt , he could soon find out how deep the holes in the frame and barrel part are to work out the length of the pins he needs ... See you Dave
Sorry I can't help you.
Atb.