Results 1 to 15 of 15

Thread: Where to source an original NP02 hammer spring.

  1. #1
    Join Date
    Mar 2008
    Location
    Rochdale
    Posts
    2,128

    Where to source an original NP02 hammer spring.

    I have just replaced the hammer spring on my Kral with one bought from Bagnall and Kirkwood which has similar measurements but has thicker wire and when fitted gave a silly high power so I cut it down to get it under and this only served to give a big power curve. I have done a Google and can only find the narrow one (8mm) whereas I need the 12.5mm wide one. Does anyone know where these can be bought from please.
    Many thanks,
    Gary.

  2. #2
    Join Date
    Mar 2008
    Location
    middlesbrough
    Posts
    2,389
    Not sure where to get one but try range right in Harrogate as they are the importers. I donít think they sell direct to the public but they can probably tell you where you can get one mate 👍

  3. #3
    Join Date
    Mar 2008
    Location
    Rochdale
    Posts
    2,128
    Quote Originally Posted by baldinio View Post
    Not sure where to get one but try range right in Harrogate as they are the importers. I donít think they sell direct to the public but they can probably tell you where you can get one mate 👍
    Thanks Chris, that's a big help.

  4. #4
    Join Date
    Nov 2014
    Location
    Batley
    Posts
    1,593
    Search for kral parts nm products and it will come up bud, itís Sheffield air rifles and they have all types from what I can see.

  5. #5
    Join Date
    Mar 2008
    Location
    Rochdale
    Posts
    2,128
    Quote Originally Posted by mattyw1987 View Post
    Search for kral parts nm products and it will come up bud, itís Sheffield air rifles and they have all types from what I can see.
    Thank you.
    I have tried N M Products but they are only showing stock of the narrower 8mm version.

  6. #6
    Join Date
    Nov 2014
    Location
    Batley
    Posts
    1,593
    Quote Originally Posted by gtfreight View Post
    Thank you.
    I have tried N M Products but they are only showing stock of the narrower 8mm version.
    Ahh I didnít check if they were in stock, that and Bagnall is the only place I can think of too.

  7. #7
    Join Date
    Aug 2016
    Location
    Melton Mowbray
    Posts
    2,128
    I might have one Gary. I'll have a look tonight and pm you if you've not found one.
    Repariere nicht, was nicht kaputtist.

  8. #8
    Join Date
    Sep 2010
    Location
    Exeter
    Posts
    36,050
    Quote Originally Posted by gtfreight View Post
    Thank you.
    I have tried N M Products but they are only showing stock of the narrower 8mm version.
    Maybe phone them & ask
    On line is great but speaking to a real person is often the answer.

  9. #9
    Join Date
    Mar 2008
    Location
    Rochdale
    Posts
    2,128
    Quote Originally Posted by Neil54 View Post
    I might have one Gary. I'll have a look tonight and pm you if you've not found one.
    Thank you Neil, that would be great if you do have one. If so, let me know how much please.

  10. #10
    Join Date
    Sep 2012
    Location
    Chelmsford
    Posts
    2,104
    I use BigDans Airguns for all my Kral spares
    Very good service and has helped with allsorts of Turkish parts


    Chris
    bigtoe, Harry, hydroclamp, jpsnorton, gayle89, mark410, Stu83, smallholder1, wellhouse0, readingcop, sir-slots-alot, danco1987, Stevenb, DarylDiane, simpleSimon, Ratinator, Milek, Josh, Maxtich, Woodsie99, Ozzie, master_shriller, niloc, Drake267, deejayuu, shootingstars

  11. #11
    Join Date
    Mar 2008
    Location
    Rochdale
    Posts
    2,128
    Quote Originally Posted by 32:1 View Post
    I use BigDans Airguns for all my Kral spares
    Very good service and has helped with allsorts of Turkish parts


    Chris
    Thank you. If Neil doesn't have one I'll have a look.

  12. #12
    Join Date
    Jun 2011
    Location
    middlesbrough
    Posts
    8,922
    What's wrong with the original spring Gary ? I thought your NP 02 was pretty new ?
    LOOKING FOR A BSA ULTRA IN .177 and .25

  13. #13
    Join Date
    Aug 2016
    Location
    Melton Mowbray
    Posts
    2,128
    Sorry Gary. I don't have a spare.
    Repariere nicht, was nicht kaputtist.

  14. #14
    Join Date
    Mar 2008
    Location
    Rochdale
    Posts
    2,128
    Quote Originally Posted by Trumpetier View Post
    What's wrong with the original spring Gary ? I thought your NP 02 was pretty new ?
    I bought a .22 barrel for as I wanted both calibres (.22 for the farm and .177 for the range). The spring needed shortening to get it under 12ft/lb in .22. With the .177 barrel the power is down below 9 ft/lb with the shortened spring.

  15. #15
    Join Date
    Mar 2008
    Location
    Rochdale
    Posts
    2,128
    Quote Originally Posted by Neil54 View Post
    Sorry Gary. I don't have a spare.
    Thanks for having a look for me Neil.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •