Where to source an original NP02 hammer spring.

[gtfreight]

I have just replaced the hammer spring on my Kral with one bought from Bagnall and Kirkwood which has similar measurements but has thicker wire and when fitted gave a silly high power so I cut it down to get it under and this only served to give a big power curve. I have done a Google and can only find the narrow one (8mm) whereas I need the 12.5mm wide one. Does anyone know where these can be bought from please.
Many thanks,
Gary.

[baldinio]

Not sure where to get one but try range right in Harrogate as they are the importers. I don’t think they sell direct to the public but they can probably tell you where you can get one mate 👍

[gtfreight]

Not sure where to get one but try range right in Harrogate as they are the importers. I don’t think they sell direct to the public but they can probably tell you where you can get one mate 👍

Thanks Chris, that's a big help.

[mattyw1987]

Search for kral parts nm products and it will come up bud, it’s Sheffield air rifles and they have all types from what I can see.

[gtfreight]

Search for kral parts nm products and it will come up bud, it’s Sheffield air rifles and they have all types from what I can see.

Thank you.
I have tried N M Products but they are only showing stock of the narrower 8mm version.

[mattyw1987]

Thank you.
I have tried N M Products but they are only showing stock of the narrower 8mm version.

Ahh I didn’t check if they were in stock, that and Bagnall is the only place I can think of too.

[Neil54]

I might have one Gary. I'll have a look tonight and pm you if you've not found one.

[angrybear]

Thank you.
I have tried N M Products but they are only showing stock of the narrower 8mm version.

Maybe phone them & ask
On line is great but speaking to a real person is often the answer.

[gtfreight]

I might have one Gary. I'll have a look tonight and pm you if you've not found one.

Thank you Neil, that would be great if you do have one. If so, let me know how much please.

[32:1]

I use BigDans Airguns for all my Kral spares
Very good service and has helped with allsorts of Turkish parts


Chris

[gtfreight]

I use BigDans Airguns for all my Kral spares
Very good service and has helped with allsorts of Turkish parts


Chris

Thank you. If Neil doesn't have one I'll have a look.

[Trumpetier]

What's wrong with the original spring Gary ? I thought your NP 02 was pretty new ?

[Neil54]

Sorry Gary. I don't have a spare.

[gtfreight]

What's wrong with the original spring Gary ? I thought your NP 02 was pretty new ?

I bought a .22 barrel for as I wanted both calibres (.22 for the farm and .177 for the range). The spring needed shortening to get it under 12ft/lb in .22. With the .177 barrel the power is down below 9 ft/lb with the shortened spring.

[gtfreight]

Sorry Gary. I don't have a spare.

Thanks for having a look for me Neil.