Can someone please let me have the spring spec for the FWB Sport MK1 127 .22
As POK can supply a spring if I can let him have the specs
Many thanks
Carl
Cheers for the info...
Regards
Carl
_______________________________________________
Done my bit for the BBS: http://www.airgunbbs.com/showthread....-being-a-mod-… now I’m a game-keeper turned poacher.
Could try something shorter with a 3.2 wire like the JM springs. What's the rear plug/guide OD?
I took my FWB apart yesterday using a hastily made compressor
The innards were in very good condition
I'll measure my guide later if i can find my calipers
My air tube and barrel need rebluing so I'll pop in to SFS and see Tony about sorting this
I'll happily try a spring POK! and post the results when I get the metalwork sorted
I have a new piston washer and breech washer from Vic Thompson
Regards
Carl
there are two things still give me nightmares after all these years the second worst was admitting to my wife i had accidently put her £90 cardy in the hot wash the result a garment suitable for an undersize dwarf ,the first slowly pushing my new titan 124 spring back into its home with an oversize sashclamp totaly unsuitable but "needs must the devil drives" as they say so take care!!.
[FWB124s]-[ORIG45]-[relum rescue ctr]
I CAN RESIST EVERYTHING EXCEPT AN FWB,