Hi Eric,
Hope you are keeping well. Try Maccari in the USA. They are very helpful and quick. Chances are they will have the bits you need and will post them. E-mail them (address on the website) and they will get back quickly.
Best wishes,
Matthew
I am in the latter stages of building a 127, after purchasing a barrel and empty cylinder a few months ago.
I have managed to source every part to complete the build, except two - the trigger adjustment screw and the safety slide.
If you have either or both of these parts spare, and are willing to part with them, please PM me.
Thanks for your attention.
ATB, Eric
NB. I have tried Alan at MAG, and John Knibbs to no avail.
Trigger adjustment screw still required PLEASE!
ALL SORTED, thanks to the kind assistance of Chrisn for making trigger adjustment screws for me, and Vic Thompson for supplying the safety slide - and Mallyally for
the measurements! What a great group of members we have on the Premier Airgun forum!!
Last edited by Herpquest; 03-09-2010 at 03:24 PM. Reason: Bringing up to date
Demic, miserable, grumpy old git! Feinwerkbau Sport Appreciation Society.
I don't mind what sexual, religious or political persuasion you are, just don't impose them on me!!
Hi Eric,
Hope you are keeping well. Try Maccari in the USA. They are very helpful and quick. Chances are they will have the bits you need and will post them. E-mail them (address on the website) and they will get back quickly.
Best wishes,
Matthew
Hi Eric - maybe you can give me a bit of advice where to find a replacement trigger ?
(blade only not the complete unit - have seen them at Maccari but very expensive)
Sorry I cant help with the trigger adj. screw and safety slide.
All the best
Les Sutherland
Might be worth contacting Dave Welham of Airmasters 88.In the past he did a fair bit of work on FWB's and modded trigger replacements for both the 124 and 127 models, might have a few left in the odds and sods box.Find him in the back pages of your favourite airgun mag;worth a try at least.
HERX77 .
Fighter against the "Dark Arts" A stranger in an even stranger land.
GC2+Leupold 14.4-34x45
AA400 fac receiver+sidewinder 8.5-34x52
Weihrauch HW77k fiddled with and doing what it wants to +Zeiss 3-9x36.
Weihrauch HW90k
Weihrauch HW97k learning from above,now sporting a Maccarri 77/97 target stock..+Bushnell 3200.Go on shoot one you know you want to
Daystate mk3 RT Delux + bushnell 4200 8-24x 40Does what it should again & again.
Fwb 124 + Optima was good is good!
Webley Vulcan.
Still requiring the trigger adjustment screw please.
Regards, Eric
Demic, miserable, grumpy old git! Feinwerkbau Sport Appreciation Society.
I don't mind what sexual, religious or political persuasion you are, just don't impose them on me!!
Still requiring these parts.
Vic Thompson please PM me..
Thanks, Eric
Demic, miserable, grumpy old git! Feinwerkbau Sport Appreciation Society.
I don't mind what sexual, religious or political persuasion you are, just don't impose them on me!!
Safey slide obtained thanks to Vic Thompson.
Trigger adjustment screw still needed.
ATB, Eric
Demic, miserable, grumpy old git! Feinwerkbau Sport Appreciation Society.
I don't mind what sexual, religious or political persuasion you are, just don't impose them on me!!
i can make this screw, cos i made one for my sport..£3 inc post if youre interested..thanks
FWB 124 sport, Theoben slr88,.Webley Omega .177,Theoben fenman,.177. HW45.177 with stock.Air arms Prosport walnut.
there you go sorted what a great place this is
Thanks Mallyally and Chrisn, very good of both of you. Your help is very much appreciated.
Regards and ATB, Eric
Demic, miserable, grumpy old git! Feinwerkbau Sport Appreciation Society.
I don't mind what sexual, religious or political persuasion you are, just don't impose them on me!!