Hi
I have the large type BACs lever pump, (not Slimjim). It works well, one stroke does the job; 2 makes it difficult to discharge. I would be grateful if someone could suggest a value.
never put off till tommorow, what you can put off till the day after
Walter CP1 (x2). Feinwerkbau C60. Hammerli 450. Webley mk3 Baikal IZH 46M. QB78. Crosman 766
Better to admit you walked through the wrong door than spend your life in the wrong room
Prices for stirrup pumps were typically £45-80 depending on condition
The ‘ gen’ brocock ones had a relief valve to govern the max load pressure
Useful tool especially if it has the cutaway tac holder
Gun control means using both hands.
Is that the big old bench-mount thing sold with the mid-80s Saxby-Palmer/Ensign rifles using the big 20-bore size air cartridges?
If so, quite rare, as the Slim Jim type was usual once the TAC/BAC guns came out.
But... How many S-P/Ensign owners (a) kept their guns on a ticket when the ban came in, (b) use them, (c) don’t already have one or more pumps and charging systems? In other words, the market is very small.
Of course, I imagine the bench pump can take the correct accessories to charge TACs and BACs. That may widen the market a bit.
Hi.
Thanks all for the replies.
On the pump I have, the cartridge I have screws directly to the pump body. I guess it would be about 20gauge, as suggested, 22 cal.
I would have posted pics, but having jumped through several hoops at photobucket, found that payment is now reqd to post to other web sites. Incidentally, having registered, It seems impossible to de-register
never put off till tommorow, what you can put off till the day after
Walter CP1 (x2). Feinwerkbau C60. Hammerli 450. Webley mk3 Baikal IZH 46M. QB78. Crosman 766