What you need is one of those Remote Sentry Guns they had in Aliens - make a bit of a mess of your house though
Remote controlled pan & tilt camera mount on tripod, King ratty fixed to mount, scope with either ip camera attached with ir and WiFi, or diy night vision with remote screen, trigger operated by cable to a gear/brake type lever, single shot manual load.
What you need is one of those Remote Sentry Guns they had in Aliens - make a bit of a mess of your house though
Custom BSA S10 .22 PAX Phoenix Mk 2 .22 Custom Titan Manitou .22 (JB BP) HW77 .22 FWB Sport Mk1 .22 Sharp Ace .22 Crossman 600 .22 Berretta 92 .20 Desert Eagle .177
Just had a brainwave......
Move.......
In a battle of wits I refuse to engage with an unarmed person.
To one shot one kill, you need to seek the S. Kill only comes from Skill
Might be an idea to find out if any of the next door neighbours are having problems as well ! If they are or find out they are, you might be able to club together and get a professional exterminator in...just a thought.
How you ask them might well depend on how well you get on with them
Norm
It’s a 1900’s house so no cavity walls, have asked one neighbor but he’s not heard anything, they’re still eating the poison but no sign of the smaller ones on the trail cam but there’s a whopper up there
emailed the council pest control today but could be a wait of up to 8 weeks ! Could be another lot by then !
How about trying one of those sonic animal repellers ? I’ve got one that has 4 different frequencies and one of them is supposed to keep rodents away.
Mice and rats have very acute hearing so it might be worth a go.
I’ve got this one.
https://www.amazon.co.uk/dp/B0077LW0...740111_TE_item
If you read down it does cats, dogs, foxes and rodents.
Norm
I’m sure this has been done. Someone tried to sell deer stalking in the US via a webcam and rifle mounted on a PTZ type mount. Caused an uproar.
You need something with an electronic trigger
just swap the gun out
Step by Step Guide http://www.instructables.com/id/Nerf...-Gun/?ALLSTEPS
Code and Project http://www.paintballsentrygun.com/
Servo database http://www.servodatabase.com/advanced-search
Set Up http://youtu.be/VS0j8_z-EZo
I got all the bits together but me an my mate started more serious MTB ing
Have a look at Arduino or Raspberry pi and stepper motors for movement/control. With raspberry you can use a pi noir camera with ir leds for illumination. All controlled via wifi
If you have the servo tilt near the centre of gravity/balance of the rifle its not going to need to be too big.
same goes for the pan.
This version uses the servo directly controlling the pan, you can design it to be used on a ring gear so you get a mechanical advantage.
My friend and I got most of the bits together but never got round to assembly.
He's a bit of a computer wizz and thought that he could run it off a raspberryPI (its all geek to me)