These guys are the Feinwerkbau importers. I’ve had spares off them in the past and they do offer a servicing service.
They’re also based in Woking
http://www.centra-uk.co.uk/centra.html
Cheers
Dave
Someone asked if I know of anyone who can service a FWB 65 in the London or Surrey area.
Any suggestions?
If not best person to do it via post?
Cheers,
Matt
These guys are the Feinwerkbau importers. I’ve had spares off them in the past and they do offer a servicing service.
They’re also based in Woking
http://www.centra-uk.co.uk/centra.html
Cheers
Dave
People said smile things could get worse, so I smiled and they did!
Fighter against the "Dark Arts" A stranger in an even stranger land.
GC2+Leupold 14.4-34x45
AA400 fac receiver+sidewinder 8.5-34x52
Weihrauch HW77k fiddled with and doing what it wants to +Zeiss 3-9x36.
Weihrauch HW90k
Weihrauch HW97k learning from above,now sporting a Maccarri 77/97 target stock..+Bushnell 3200.Go on shoot one you know you want to
Daystate mk3 RT Delux + bushnell 4200 8-24x 40Does what it should again & again.
Fwb 124 + Optima was good is good!
Webley Vulcan.
Whether they are difficult or not to work on......I'm not sure but I'd certainly put them in the fiddly catagory, especially the trigger mechanism. If they fancy having a go & think they have the skills then it's up to them but since they have asked for advice on who can service it for them I guess they don't fancy popping down to the shed to have a go. Its sometimes good to know where to draw the line. I think the shims are critical.....assuming its already assembled correctly then all the bits need to go back in exactly the same place as they came out of. The shims, as I understand it, make up to different thicknesses & need to be kept in order & not mixed up or else it will not function correctly. Hope the interruptor hasn't broken as I think they are rarer than scarce. Have bought from Centra but never asked them to service a FWB65.
Hi Mat
Paul O' Donnell at our fair is about as good as you will find.
Hi Peter,
It wasn’t for me and the owner is happy to try Centra as they live close by.
Thanks for the suggestion though.
I might want someone to have a look at a Diana 60 though, just to balance the pistons perfectly.
Anyone at the fair who’s a dab hand with those?
Cheers,
Matt