Not sure where to get one but try range right in Harrogate as they are the importers. I don’t think they sell direct to the public but they can probably tell you where you can get one mate 👍
I have just replaced the hammer spring on my Kral with one bought from Bagnall and Kirkwood which has similar measurements but has thicker wire and when fitted gave a silly high power so I cut it down to get it under and this only served to give a big power curve. I have done a Google and can only find the narrow one (8mm) whereas I need the 12.5mm wide one. Does anyone know where these can be bought from please.
Many thanks,
Gary.
Not sure where to get one but try range right in Harrogate as they are the importers. I don’t think they sell direct to the public but they can probably tell you where you can get one mate 👍
Search for kral parts nm products and it will come up bud, it’s Sheffield air rifles and they have all types from what I can see.
I might have one Gary. I'll have a look tonight and pm you if you've not found one.
Repariere nicht, was nicht kaputtist.
I use BigDans Airguns for all my Kral spares
Very good service and has helped with allsorts of Turkish parts
Chris
bigtoe, Harry, hydroclamp, jpsnorton, gayle89, mark410, Stu83, smallholder1, wellhouse0, readingcop, sir-slots-alot, danco1987, Stevenb, DarylDiane, simpleSimon, Ratinator, Milek, Josh, Maxtich, Woodsie99, Ozzie, master_shriller, niloc, Drake267, deejayuu, shootingstars
What's wrong with the original spring Gary ? I thought your NP 02 was pretty new ?
LOOKING FOR A BSA ULTRA IN .177 and .25
Sorry Gary. I don't have a spare.
Repariere nicht, was nicht kaputtist.