Results 1 to 15 of 15

Thread: does Daystate Reflex AirStream Silencer fit FX Verminator?

  1. #1
    Join Date
    Feb 2009
    Location
    Redditch
    Posts
    500

    does Daystate Reflex AirStream Silencer fit FX Verminator?

    As the title says.

    the AirStream Reflex seems quite interesting as it stick out just 10cm.

    http://www.daystate.co.uk/images/Airstream-MK4.jpg

  2. #2
    Join Date
    Jan 2007
    Location
    Cotswolds, nr Cheltenham
    Posts
    5,478
    I think it probably will

    Daystate use LW barrels as well, so the barrel OD should be ok, you'll have to 'do the maths' on how far it reflexes back though.

    I've a Daystate Airstream MK3 (I think) here in .177 & its very good.

  3. #3
    Graham2 is offline Slightly camp, makes decent chilli, and has a box of tissues and a can of 3 In 1 in the gun room
    Join Date
    Jun 2005
    Location
    Sidcup, Kent, The Garden Of England
    Posts
    3,191
    The fact that Daystate and FX use Walther barrels is irrelevant I'm afraid.

    Daystate rifles and FX Verminators both have shrouded barrels, so it's the diameter of the shroud that's important.

  4. #4
    Ali-C is offline It looks so pretty burning
    Join Date
    Jan 2009
    Location
    Ringwood
    Posts
    2,905
    Quote Originally Posted by Graham2 View Post
    The fact that Daystate and FX use Walther barrels is irrelevant I'm afraid.

    Daystate rifles and FX Verminators both have shrouded barrels, so it's the diameter of the shroud that's important.
    A Veminator doesn't have a shrouded barrel, does it? Last one I saw didn't.

    As for fit, it also depends how far it comes back over the barrel, the cylinder may get in the way.
    Quote Originally Posted by madnurse View Post
    Would like to try FT but being a short fat stumpy git i would look like a weeble wobbling about, spraying pellets everywhere like a deranged mafia boss

  5. #5
    Join Date
    Jan 2007
    Location
    Cotswolds, nr Cheltenham
    Posts
    5,478
    Graham, whilst it is possible to buy some FX guns with a sleeved LW barrel, the vast majority use the standard LW barrels (2 different sizes offered). The Verminator uses the standard barrel.

  6. #6
    Join Date
    May 2007
    Location
    Gloucester
    Posts
    1,131
    i think you can retro fit them i think you have to get an oring that is the right size to go over the barrel and prevent any air coming out. as others have said you may want to look at the sizes to make sure one would fit.
    Adam

  7. #7
    Join Date
    Feb 2009
    Location
    Redditch
    Posts
    500
    Quote Originally Posted by Ian Johnstone View Post
    you'll have to 'do the maths' on how far it reflexes back though.
    That's right. Can anyone who has a Vemri please tell me the length between the end of the front tube to the front end of the barrel ? TA

  8. #8
    Murphy is offline Cooee! Chase me you naughty boys!
    Join Date
    Aug 2003
    Location
    Wigan
    Posts
    22,424
    Quote Originally Posted by Ian Johnstone View Post
    The Verminator uses the standard barrel.
    Why does it have the brass silencer adaptor on it then if its not shrouded ??
    Master Debater

  9. #9
    Ali-C is offline It looks so pretty burning
    Join Date
    Jan 2009
    Location
    Ringwood
    Posts
    2,905
    Quote Originally Posted by Murphy View Post
    Why does it have the brass silencer adaptor on it then if its not shrouded ??
    Asthetic reasons?
    Quote Originally Posted by madnurse View Post
    Would like to try FT but being a short fat stumpy git i would look like a weeble wobbling about, spraying pellets everywhere like a deranged mafia boss

  10. #10
    Graham2 is offline Slightly camp, makes decent chilli, and has a box of tissues and a can of 3 In 1 in the gun room
    Join Date
    Jun 2005
    Location
    Sidcup, Kent, The Garden Of England
    Posts
    3,191
    Verminators have shrouded barrels.

  11. #11
    Join Date
    Feb 2009
    Location
    Gloucester
    Posts
    130
    you'll be lucky if they did as my understanding is that they are caliber and Daystate model specific.
    B
    Daystate Mk4S, Mk4 moderator, MTC Viper, 4-16x50 scope. AA510s, TX mod, MTC Mamba, 4-16x50 scope, Yukon NVMT 4 Monocular with day scope adaptor. HW45 Silver Star. All .177. When there's a lynch mob in town, join 'em or hide but don't try reasoning with them

  12. #12
    Join Date
    Jan 2007
    Location
    Cotswolds, nr Cheltenham
    Posts
    5,478
    This is all much too messy for me,

    Gentlemen, sort it out amongst yourselves.

    [Ding Ding, round 1]

  13. #13
    Murphy is offline Cooee! Chase me you naughty boys!
    Join Date
    Aug 2003
    Location
    Wigan
    Posts
    22,424
    Quote Originally Posted by Ali-C View Post
    Asthetic reasons?
    Cut and pasted off BAR's website.

    The Lothar Walther match grade shrouded barrel also has a half-inch male thread,
    onto which you can fit your own choice of quality silencer to take this rifle into the super-quiet league.
    Master Debater

  14. #14
    Join Date
    Jun 2008
    Location
    boston
    Posts
    1,244

    reflex

    Quote Originally Posted by smartwave View Post
    As the title says.

    the AirStream Reflex seems quite interesting as it stick out just 10cm.

    http://www.daystate.co.uk/images/Airstream-MK4.jpg
    The reflex silencer did not fit on my Verminator for the simple reason
    it came back to far. didnt know the Vermy was shrouded tho.
    Daystate Airwolf MVT.22 40ft RUGER77/17hmr RUGER SR22
    "DON'T EVER SHOOT A 17 HMR. What ever you thought you knew about 22 rim fires, and loved about them, will be lost forever. It's like dumping your wife for Miss America."

  15. #15
    Join Date
    Dec 2013
    Location
    northwich
    Posts
    4

    some clarity

    Hi, I believe the mk1 verminator (or gladiator - big brother) do not have shrouded barrels. The mk2 does though.
    I own a gladiator and mk 1 verminator.

    Early mk1 verminators did have a brass adapter to 1/2 inch UNC male for suppressors but my mk1 is circa 2011 and has a smooth-twist barrel (only partial rifling) and does not have the brass figment. What it does have is 2 inches of extra barrel length with a capping piece to cover the manufacturing marks from making the smooth twist, which is also directly threaded for 1/2 inch UNC male. I believe this is the same barrel that lurks inside the mk2 shroud.

    When I bought it second hand I was concerned that the barrel looked wrong compared to a friends earlier mk1 so I contacted the fx importer and was told the above.

    So early mk1s probably don't have enough barrel past the cylinder to accommodate an airstream but later ones I think do, which would be nice so as to offset the new longer barrel.

    Personally I came on here to find a custom reflex moderator on a recommendation from someone at my local range...

    I hope the above info helps.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •